Poster Presentation Time: 1225-1400; 1500-1600

Venue: H2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Pauli LAI, Lecturer, Department of Electrical and Electronic Engineering, The Hong Kong Polytechnic University

– Dr Julia CHEN, Director, Educational Development Centre, The Hong Kong Polytechnic University

Abstract

A common assessment in university is the oral presentation, and students are often required to deliver presentations in English. Two challenges arise. First, many students mainly focus on the discipline content in the assessment preparation process rather than the communication or use of English in their presentations. Second, lecturers of large classes (e.g. around 200 engineering students in one course) hardly have time to give feedback to each student on the English communication aspect of their oral presentations. A baseline survey reveals students’ need for assistance with presentation skills and a hope for having AI-generated feedback among both students and discipline teachers. To address these needs and hope, a team of educators from PolyU and BU with expertise in language and AI technology collaboratively developed an online English oral presentation platform called SmartPresenter. SmartPresenter provides students with presentation tips, learning materials, and extensive AI-generated feedback on the communication-related aspects of delivering oral presentations in English, including eye contact, facial expressions, vocal fillers, pronunciation, and fluency. This presentation describes the development and features of SmartPresenter, and the evaluation results of the effectiveness of the platform in facilitating independent learning practices for English oral presentations and assisting teachers in grading presentation assessment.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: B4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Mr Frankie Tsz Ki FAN, Executive Officer, Talent and Education Development Office, City University of Hong Kong

Abstract

CityUHK launched the CityU Tiger Programme for nurturing the talents of tomorrow and transforming students into future global leaders. The Programme targets both newly-admitted undergraduate students with outstanding academic performance as well as high-achieving first-year students and have approximately 1,000 members in 2023/24. With constant guidance and support from faculty members, the Programme organised various tailored activities for these elite students, allowing them to navigate the challenges of the fast-changing world, cultivate their talents in their respective fields of study, contribute to their communities, and ultimately emerge as future leaders and change-makers.

Theme: 2. Thematic Exploration

Sub-theme: 2.4  Whole-Person Development

Poster Presentation Time: 1225-1400; 1500-1600

Venue: J1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Professor Jeanne TAN, Professor, School of Fashion and Textiles, The Hong Kong Polytechnic University

– Dr Wing Chung WONG, Post-Doctoral Fellow, School of Fashion and Textiles, The Hong Kong Polytechnic University

Abstract

Talent development in innovation and technology is key to the sustainable development of a vibrant economy. STEM education plays a vital role in nurturing a globally competitive workforce for the future. Fostering STEM literacy at the early stages of education will equip students with the core knowledge and interdisciplinary skills for creative innovation and contributing to the future economy. Conventional education is often discipline-focused with a tendency to employ linear learning strategies which do not fully explore the knowledge opportunities present in the interdisciplinary STEM content. This often results in a skewed emphasis on technical content which young students may find difficult to contextualise in daily life. The reflective and adaptive nature of design may serve as an effective bridge to connect creativity and knowledge seeking in STEM domains (Toomey and Tan, 2018). A design-led STEM framework was adopted in two Quality Education Fund projects, reaching over 1000 secondary school students. These projects utilized fashion, artificial intelligence, and e-textiles as mediums to help students develop problem solving skills with real world applications.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Kenneth Chi-hang LO, Associate Division Head and Senior Lecturer, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University

– Dr Anthony Wai-keung LOH, Division Head and Director of Hong Kong Community College, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University,

Abstract

The learning and teaching of science and/or engineering subjects face a big challenge under the COVID-19 pandemic because all face-to-face laboratory works are suspended. Since laboratory works are essential and critical elements to science and engineering education. Teachers have tried other means to relief the effect by performing demonstration, simulation or virtual laboratory, such that experimental data can be collected for analysis afterwards. However, students commented that they cannot see and control the laboratory apparatus in “real” time. Besides, students are required to conduct experiments in a fixed schedule and usually the teaching and laboratory schedules are not synchronized, due to the limited laboratory equipment and space. Students are required to conduct the experiment before the teaching of the corresponding theory. This affects their learning experience and motivation. The proposed project aims to develop a web-based remote laboratory for science and engineering education to facilitate student independent learning and enhance their learning experience. The objectives of the project are to: (1) design the infrastructure and software specification of the remote laboratory system; (2) identify experimental sets that can be conducted remotely; (3) enhance student learning experience and engagement as “real time” operation of laboratory equipment individually or in a group at anytime and anywhere under safe and controlled environment; (4) reduce the initial investment on offering science and/or engineering programmes by other local institutions for a better development of the sector; (5) enhance collaboration between local and even overseas institutions by sharing experimental sets; (6) inspire the tertiary education sector to develop blended and online teaching modules for science and engineering subjects which required laboratory works.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400;1500-1600

Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: H1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Ir Dr H H CHEUNG, Senior Lecturer, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Derek TONG, Tutor, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Like WEN, Research Assistant, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

Abstract

The past social events and COVID-19 pandemic posed huge challenges to teaching and learning. The teaching team seized these challenges as opportunities to develop and incorporate e-learning in experiential projects and capstone courses, which otherwise mandate intensive face-to-face interactions. The team has developed the Digital Design House – An e-learning platform for collaborative product development – to facilitate experiential learning and hands-on projects in various courses that carry substantial components of innovative product design and development. The Digital Design House is a cloud-based experiential e-learning platform that provides remote access to CAD facilities for students to interact among group members and with teachers in virtual environments to share their ideas for product design and development. This e-learning platform integrates a set of advanced information and computing, 3D Hologram devices, virtual reality, mixed reality, and mobile devices with a suite of in-house developed applications for stereoscopic visualisation of virtual objects in an immersive virtual environment to facilitate systematic training and development of students’ innovative abilities through experiential learning. It not only allows students at different geographical regions and teachers to ubiquitously conduct teaching and learning, but also facilitates online lectures via video conferencing like Zoom or Microsoft Teams with more interactions in a virtually face-to-face environment. Indeed, this platform helps students understand what and how various knowledge and feasible technologies can be effectively integrated to create a feasible design/solution in a practical-and-innovative approach. As such, students are inspired with a stronger desire, self-initiative, and enthusiasm for exploring their potential in innovative creations.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: E2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Grace NGAI, Head, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Dr Stephen CHAN, Principal Project Fellow and Founding Head, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Dr Perry LEE, Manager, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Dr Angel LUO, The Hong Kong Polytechnic University

– Dr Shuheng LIN, Project Fellow, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Mr Kenneth LO, Senior Manager, Service-Learning and Leadership Office, The Hong Kong Polytechnic University,

Abstract

In Hong Kong, internationalization is a key performance indicator for the higher education section in response to the policy goal of establishing the city as a regional education hub (University Grants Committee, 2017). Resources have been allocated to universities for various initiatives including the recruitment of international faculty and students, inter-institutional collaboration in research, and students’ overseas learning experiences. A document analysis study on 6 universities in Hong Kong showed a notable increase of institutional focus on internationalization, intercultural skills, culture, diversity, equality, and inclusion post-pandemic (Lai, 2022). Besides its contribution to global connectivity, knowledge exchange, and institutional development (Lane, 2014), internationalizing higher education is also important to prepare students for a globalized world (Egron-Polak, 2011). Given the increasing diversity within universities and societies, prioritizing the cultivation of students’ intercultural sensitivity (IS) has become essential as it enhances students’ academic and personal success and fosters harmony and development within communities. Different strategies have been implemented in higher education institutes to provide intercultural opportunities for students. These include student mobility programmes, including short and long-term immersive learning activities that bring students outside of their home country to study abroad. At the Hong Kong Polytechnic University, this includes international service-learning (ISL), with a university target of 50% of students having an ISL experience by 2027-28. In this poster presentation, we will study the impact of ISL on students’ intercultural sensitivity from multiple dimensions, including knowledge, skills, and attitudes.

Theme: 2. Thematic Exploration

Sub-theme: 2.3  Community Engaged Learning

Oral Presentation Time: 1600-1700
Poster Presentation Time: 1500-1600; 1700-1800

Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: E4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Professor Joseph CHAN, Associate Director at Centre for Innovation and Entrepreneurship, HKU Business School, The University of Hong Kong

– Dr Jing LI, Lecturer and BBA (International Business and Global Management) Deputy Programme Director, HKU Business School, The University of Hong Kong

Abstract

Teaching and learning for innovation and entrepreneurship requires equipping students with the necessary skills for cross-disciplinary innovation: conducting academic research for scientific advancement, designing projects to translate research into applications, and connecting these to the value-chain for market adoption and commercialization. This TDG project aims at the third area – to train students for the entrepreneurial ecosystem, particularly the Greater Bay Area. The project utilizes interactive learning methods from business interviews of guest speakers to case discussions, including direct communication with industry professionals, for first-hand knowledge and perspectives to deepen students’ understanding of innovation and business strategies. The curriculum is further enhanced through tailor-made videos featuring interviews with senior management, offering practical insights into strategies and operations. This project establishes a hub of applied studies covering a spectrum of industries, to serve as a valuable resource for larger innovation community audience. The core in this pedagogical methodology is to bring industry into the classroom, and vice versa. Online and offline activities foster community building and knowledge exchange within the innovation ecosystem, while students’ reflection encourages them to apply their learning in the GBA.

Theme: 2. Thematic Exploration

Sub-theme: Community Engaged Learning & Community of Practice (CoP)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: G1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Yuk Ming TANG, Senior Lecturer, Department of Indusial and System Engineering, The Hong Kong Polytechnic University

Abstract

STEM education is essential in today’s curriculum even for university students. However, traditional classroom-based instruction methods often lack interactivity and tailored experiences that foster student engagement and comprehension. The integration of Virtual Reality (VR) and Artificial Intelligence (AI) generative chatbots has emerged as a transformative influence on the teaching and learning process. Despite this, limited research has explored the impact of advanced technology on STEM learning outcomes. This study explores the potential of employing VR and AI as tools to facilitate teaching to enhance students’ learning outcomes. 120 university students are involved in this study to examine the difference in learning outcomes by utilizing three instructional approaches for learning projectile motion: (1) a traditional didactic classroom, (2) a game-based VR metaverse, and (3) a game-based VR metaverse enriched with a generative chatbot-based pedagogical agent. The study prudently evaluated alterations in student motivation, cognitive benefit, and learning outcomes. Preliminary findings suggest that incorporating VR and AI into teaching considerably enhances student engagement and cognitive participation. This study demonstrates how the integration of VR with AI can elevate student engagement, comprehension, and skill acquisition in STEM education, paving the way for a more captivating and effective learning environment in the Edu-metaverse.

Theme: 2. Thematic Exploration

Sub-theme: 2.1 Community of Practice (CoP)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Dr Edmund Tai Ming WUT, Senior Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

We aim to investigate factors affecting students’ intention to join blended learning courses in higher education sector using Community of Inquiry framework and Unified Theory of Acceptance and Use of Technology (UTAUT) model. Stimulus-Organism-Response (S-O-R) model was employed to develop a new research framework while constructs in the Community of Inquiry are Stimulus and constructs from UTAUT are considered as Organism and Response. A survey was conducted with undergraduate students in a Hong Kong higher institution. It was found that Teaching Presence (TP), Social Presence (SP) and Cognitive Presence (CP) were associated with performance expectancy, social influence and effort expectancy respectively. Performance expectancy and effort expectancy were associated with social influence. Social influence was associated with students’ attitude towards blended learning. Institution support was not related to the students’ attitude towards blended learning in the post-pandemic period. Attitude towards blended learning was associated with their behavioral intention to participate in blended learning. Online and offline tools could be adopted to improve the students’ acceptance towards the blended learning approach.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: B3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Xiang LI, Assistant Professor, Department of Applied Social Science, The Hong Kong Polytechnic

– Dr Xiaoqin ZHU, Assistant Professor, Department of Applied Social Science, The Hong Kong Polytechnic

– Dr Diya DOU, Assistant Professor, Department of Applied Social Science, The Hong Kong Polytechnic

Abstract

Higher education programs often focus on disciplinary knowledge and professional skills, with cognitive skills given top priority. As a timely response to limited education for wellbeing and non-cognitive skills development, PolyU’s Leadership and Intra-personal Development Team developed four subjects, including Tomorrow’s Leaders, Promotion of Children and Adolescent Development, Service Leadership, and Service Leadership through Serving Children and Families with Special Needs to nurture students’ leadership, improve their wellbeing, and promote their whole person development. These subjects aim to nurture students to become ethical leaders of tomorrow and responsible citizens by adopting a holistic youth development approach based on cutting-edge theories and research on late adolescence and emerging adulthood, leadership development, and service-learning. To date, over 27,000 students have taken the four subjects. Different evaluation methods involving multiple stakeholders over time have demonstrated positive and significant impact of the four subjects on students’ wellbeing and holistic development. Positive feedback from students and recognition from the higher education community have contributed to these subjects receiving numerous prestigious awards, both internationally and locally. These include the UGC Teaching Award 2018 and the Gold Award in the Nurturing Wellbeing & Purpose category at the Wharton-QS Stars Reimagine Education Awards 2021.

Theme: 2. Thematic Exploration

Sub-theme: 2.4  Whole-Person Development

Poster Presentation Time: 1500-1600; 1700-1800

Venue: E3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Christelle NOT, Senior Lecturer, Department of Earth Sciences, The Unviersity of Hong Kong

Abstract

This study explored how the emotional framing of climate change messages (hope appeal vs. fear appeal) impacted students’ emotions and sense of efficacy towards addressing climate change. Prior research had focused on the persuasive effects of hope and fear appeals, but lacked investigation into how audience perceptions influence the interpretation of these messages. The quantitative results showed that the hope-appeal group experienced a significantly greater increase in self-efficacy and collective efficacy compared to the fear-appeal group. Qualitative analysis provided potential explanations – hope-appeal videos shifted students’ attention towards messages about effective mitigation actions, while fear-appeal videos directed focus to the negative consequences of climate change. Importantly, before the intervention, many students believed individual efforts were negligible compared to collective action. However, the hope-appeal’s emphasis on efficacy allowed students to recognize the value of their individual contributions, boosting their self-efficacy and collective efficacy. The findings suggest that communicating climate solutions with hope and gain-framed messages, rather than fear appeals, may be more effective in empowering younger generations to take meaningful action against climate change.

Theme: 2. Thematic Exploration

Sub-theme: 2.3  Community Engaged Learning