- Reset all ×
- Oral Presentation ×
- The Chinese University of Hong Kong ×
- The University of Hong Kong ×
- 1.1 Teaching Development and Language Enhancement Grant (TDLEG) ×
- 1.2 Fund for Innovative Technology-in-Education (FITE) ×
- 1.3 Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL) ×
- 2.1 Community of Practice (CoP) ×
- 2.3 Community Engaged Learning ×
- 2.4 Whole-Person Development ×
Filter Presentations
8 posts found
Oral Presentation Time: 1600-1700
Venue: Fanling Room, Lower Level I
Presenter(s)
– Professor Carmen WONG, Assistant Dean (Faculty Development) and Clinical Professional Consultant, The Jockey Club School of Public Health and Primary Care, Faculty of Medicine, The Chinese University of Hong Kong
Abstract
Many industries have adopted design thinking as a powerful approach to problem-solving and innovation. A Community of Practice on Design Thinking can enhance experience sharing, ideas development and collectively enrich design thinking capabilities. For educators this can facilitate sharing of curricula concerns and problems, topical interests, and deepen their knowledge and experience of design thinking in education. The HKTEA Design Thinking Community of Practice in Higher Education was established in November 2023. The presentation aims to explore the process and challenges of setting up a community of practice on design thinking within the education arena. The session will begin by providing an overview of community of practice and design thinking considerations. The journey in setting up the Design Thinking community of practice from developing design thinking educational resources, exploring educator challenges in different institutions and disciplines and fostering network and exchange will be discussed. Key steps involved in establishing a community of practice and ongoing development will be highlighted. Attendees will be equipped with practical insights and actionable strategies to initiate and nurture a community of practice in their own and/or across institutions.
Theme: 2. Thematic Exploration
Sub-theme: Community of Practice (CoP)
Oral Presentation Time: 1400-1500
Venue: Camomile Room, Lower Level II
Presenter(s)
– Professor Adam FINGRUT, Director, Master of Architecture Programme, School of Architecture, The Chinese University of Hong Kong
Abstract
Design thinking methods are critical for architecture students as they provide a framework for human-centered and iterative problem-solving. This approach encourages students to empathize with the users of their designs, define the problem, ideate potential solutions, create prototypes, and test their ideas in real-world settings. By adopting an iterative approach toward full-scale prototyping of built projects, architecture students can gain valuable experience developing sustainable designs that consider the most efficient use of materials. The importance of prototyping with advanced tools to architecture students cannot be overstated in the context of STEAM-based higher education in Hong Kong. Using contemporary tools has become an integral part of the design process, and students must be equipped with the skills and knowledge necessary to utilize them effectively. This project considers design thinking and STEAM-based methods as essentials for architecture students as they provide a framework for developing sustainable and efficient designs. It adopts a peer learning pedagogy that promotes collaboration, mutual support, and knowledge sharing among students, which can enhance their academic and personal growth.
Theme: 1. Showcase Project Achievements
Sub-theme: Teaching Development and Language Enhancement
Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400;1500-1600
Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: H1, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Ir Dr H H CHEUNG, Senior Lecturer, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong
– Mr Derek TONG, Tutor, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong
– Mr Like WEN, Research Assistant, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong
Abstract
The past social events and COVID-19 pandemic posed huge challenges to teaching and learning. The teaching team seized these challenges as opportunities to develop and incorporate e-learning in experiential projects and capstone courses, which otherwise mandate intensive face-to-face interactions. The team has developed the Digital Design House – An e-learning platform for collaborative product development – to facilitate experiential learning and hands-on projects in various courses that carry substantial components of innovative product design and development. The Digital Design House is a cloud-based experiential e-learning platform that provides remote access to CAD facilities for students to interact among group members and with teachers in virtual environments to share their ideas for product design and development. This e-learning platform integrates a set of advanced information and computing, 3D Hologram devices, virtual reality, mixed reality, and mobile devices with a suite of in-house developed applications for stereoscopic visualisation of virtual objects in an immersive virtual environment to facilitate systematic training and development of students’ innovative abilities through experiential learning. It not only allows students at different geographical regions and teachers to ubiquitously conduct teaching and learning, but also facilitates online lectures via video conferencing like Zoom or Microsoft Teams with more interactions in a virtually face-to-face environment. Indeed, this platform helps students understand what and how various knowledge and feasible technologies can be effectively integrated to create a feasible design/solution in a practical-and-innovative approach. As such, students are inspired with a stronger desire, self-initiative, and enthusiasm for exploring their potential in innovative creations.
Theme: 1. Showcase Project Achievements
Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)
Oral Presentation Time: 1600-1700
Poster Presentation Time: 1500-1600; 1700-1800
Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: E4, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Professor Joseph CHAN, Associate Director at Centre for Innovation and Entrepreneurship, HKU Business School, The University of Hong Kong
– Dr Jing LI, Lecturer and BBA (International Business and Global Management) Deputy Programme Director, HKU Business School, The University of Hong Kong
Abstract
Teaching and learning for innovation and entrepreneurship requires equipping students with the necessary skills for cross-disciplinary innovation: conducting academic research for scientific advancement, designing projects to translate research into applications, and connecting these to the value-chain for market adoption and commercialization. This TDG project aims at the third area – to train students for the entrepreneurial ecosystem, particularly the Greater Bay Area. The project utilizes interactive learning methods from business interviews of guest speakers to case discussions, including direct communication with industry professionals, for first-hand knowledge and perspectives to deepen students’ understanding of innovation and business strategies. The curriculum is further enhanced through tailor-made videos featuring interviews with senior management, offering practical insights into strategies and operations. This project establishes a hub of applied studies covering a spectrum of industries, to serve as a valuable resource for larger innovation community audience. The core in this pedagogical methodology is to bring industry into the classroom, and vice versa. Online and offline activities foster community building and knowledge exchange within the innovation ecosystem, while students’ reflection encourages them to apply their learning in the GBA.
Theme: 2. Thematic Exploration
Sub-theme: Community Engaged Learning & Community of Practice (CoP)
Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400; 1500-1600
Oral Presentation Venue: Fanling Room, Lower Level I
Poster Presentation Venue: I2, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Dr Ting Leung Albert LEE, Lecturer, Department of Electrical and Electronic Engineering, The University of Hong Kong
– Dr Victor LEE, Lecturer, Department of Electrical and Electronic Engineering, The University of Hong Kong
– Dr Zhengyuan WEI, Research Associate, Department of Electrical and Electronic Engineering, The University of Hong Kong
– Mr Alex KIANG, The University of Hong Kong
Abstract
Retrieval-augmented generation (RAG) has been demonstrated to be highly effective in generative AI applications, resulting in substantial improvement in accuracy and reliability of large language model responses. The success of this approach is accomplished through seamless integration of AI capabilities and practical knowledge base, which fosters an interactive learning mechanism conducive to automatic question-answering augmented with references and refined prompts, leading to a more vibrant and connected learning environment. Communication portals enable effective inquiry and prompt responses while the course-specific chatbot helps reduce teachers’ workload and streamline classroom management. In this project, the RAG approach is applied to a discipline-core course named Integrated Design Project (IDP) in the second semester 2023-24. This project-based course consists of 78 EEE undergraduate students with diverse programming experience. The IDP-specific AI chatbot is developed using the Coze platform with a Discord server. To name a few, the main contents of practical knowledge base include the procedures for setting up a Raspberry Pi webcam, the installation process of Jetson Inference library on Jetson Nano, how to use YOLO model for object detection, how to install Jetson inference library on Jetson Nano, etc. The anonymous feedback survey conducted at the end of the course shows high utilization and satisfaction of the chatbot, confirming the effectiveness of this approach in facilitating students’ learning.
Theme: 1. Showcase Project Achievements
Sub-theme: Innovative Technology-in-Education
Oral Presentation Time: 1600-1700
Venue: Rose Room, Lower Level II
Presenter(s)
– Dr Janet CHAN, Senior Lecturer, School of Biological Sciences, The University of Hong Kong
Abstract
Fifty undergraduate (UG) students from various faculties at HKU have been trained as Climate Ambassadors through the project titled “Partnering with Students in Climate Education: HKU Climate Ambassador.” This climate education initiative is supported by the HKU Teaching Development Grant and aims to empower UG students to co-create climate actions and make a meaningful impact on broader communities. The project commenced in February 2024. To enhance students’ understanding of climate issues and involve them as partners, ten postgraduates and alumni have been appointed as mentors. They provide engaging dialogues and guidance to the UG students in their climate action endeavors. Additionally, students receive training through team-building activities, field trips, and seminars conducted by climate experts. Subsequently, students form groups and develop their own climate actions, such as addressing food waste, promoting biodiversity, and exploring public attitudes towards waste recycling. These actions will be showcased in a student-led conference scheduled for mid-June 2024. Following the conference, 18 selected Climate Ambassadors will participate in a desert service-learning trip in mainland China in July 2024, supported by YMCA and the Teaching Development and Language Enhancement Grant 2022-25. During the seven-day stay in Tengger Desert, these 18 HKU Climate Ambassadors will play a crucial role as co-developers of the camp. They will be empowered to educate camp participants and local communities about climate change and waste reduction. Collaborating with camp participants, they will carry out climate-related services, engage in personal reflection, and create meaningful impact within their own circles and the wider community. These experiences will help our Climate Ambassadors develop essential soft skills, including problem-solving, communication, leadership, and teamwork. Moreover, this experiential learning opportunity will incorporate international, intercultural, and global dimensions, enabling our HKU students to cultivate a global outlook, global citizenship, cultural inclusiveness, and intercultural competence – all highly valued by employers in today’s workplace.
Theme: 2. Thematic Exploration
Sub-theme: Community Engaged Learning & Community of Practice (CoP)
Oral Presentation Time: 1400-1500
Venue: Rose Room, Lower Level II
Presenter(s)
– Dr Jian YANG, Deputy Director of Education Technology (EdTech HKUMed), LKS Faculty of Medicine, The University of Hong Kong
Abstract
The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.
Theme: 1. Showcase Project Achievements
Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)
Oral Presentation Time: 1400-1500
Venue: Camomile Room, Lower Level II
Presenter(s)
– Professor Michael BOTELHO, Clinical Professor, Restorative Dental Sciences, Faculty of Dentistry, The University of Hong Kong
– Ms Trinity JIAO, HKU SaP CoP Project Coordinator, Restorative Dental Sciences, Faculty of Dentistry, The University of Hong Kong
Abstract
The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.
Theme: 1. Showcase Project Achievements