Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Carmen WONG, Assistant Dean (Faculty Development) and Clinical Professional Consultant, The Jockey Club School of Public Health and Primary Care, Faculty of Medicine, The Chinese University of Hong Kong

Abstract

Many industries have adopted design thinking as a powerful approach to problem-solving and innovation. A Community of Practice on Design Thinking can enhance experience sharing, ideas development and collectively enrich design thinking capabilities. For educators this can facilitate sharing of curricula concerns and problems, topical interests, and deepen their knowledge and experience of design thinking in education. The HKTEA Design Thinking Community of Practice in Higher Education was established in November 2023. The presentation aims to explore the process and challenges of setting up a community of practice on design thinking within the education arena. The session will begin by providing an overview of community of practice and design thinking considerations. The journey in setting up the Design Thinking community of practice from developing design thinking educational resources, exploring educator challenges in different institutions and disciplines and fostering network and exchange will be discussed. Key steps involved in establishing a community of practice and ongoing development will be highlighted. Attendees will be equipped with practical insights and actionable strategies to initiate and nurture a community of practice in their own and/or across institutions.

Theme: 2. Thematic Exploration

Sub-theme: Community of Practice (CoP)

Oral Presentation Time: 1400-1500

Venue: Camomile Room, Lower Level II

Presenter(s)

– Professor Adam FINGRUT, Director, Master of Architecture Programme, School of Architecture, The Chinese University of Hong Kong

Abstract

Design thinking methods are critical for architecture students as they provide a framework for human-centered and iterative problem-solving. This approach encourages students to empathize with the users of their designs, define the problem, ideate potential solutions, create prototypes, and test their ideas in real-world settings. By adopting an iterative approach toward full-scale prototyping of built projects, architecture students can gain valuable experience developing sustainable designs that consider the most efficient use of materials. The importance of prototyping with advanced tools to architecture students cannot be overstated in the context of STEAM-based higher education in Hong Kong. Using contemporary tools has become an integral part of the design process, and students must be equipped with the skills and knowledge necessary to utilize them effectively. This project considers design thinking and STEAM-based methods as essentials for architecture students as they provide a framework for developing sustainable and efficient designs. It adopts a peer learning pedagogy that promotes collaboration, mutual support, and knowledge sharing among students, which can enhance their academic and personal growth.

Theme: 1. Showcase Project Achievements

Sub-theme: Teaching Development and Language Enhancement

Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400;1500-1600

Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: H1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Ir Dr H H CHEUNG, Senior Lecturer, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Derek TONG, Tutor, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Like WEN, Research Assistant, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

Abstract

The past social events and COVID-19 pandemic posed huge challenges to teaching and learning. The teaching team seized these challenges as opportunities to develop and incorporate e-learning in experiential projects and capstone courses, which otherwise mandate intensive face-to-face interactions. The team has developed the Digital Design House – An e-learning platform for collaborative product development – to facilitate experiential learning and hands-on projects in various courses that carry substantial components of innovative product design and development. The Digital Design House is a cloud-based experiential e-learning platform that provides remote access to CAD facilities for students to interact among group members and with teachers in virtual environments to share their ideas for product design and development. This e-learning platform integrates a set of advanced information and computing, 3D Hologram devices, virtual reality, mixed reality, and mobile devices with a suite of in-house developed applications for stereoscopic visualisation of virtual objects in an immersive virtual environment to facilitate systematic training and development of students’ innovative abilities through experiential learning. It not only allows students at different geographical regions and teachers to ubiquitously conduct teaching and learning, but also facilitates online lectures via video conferencing like Zoom or Microsoft Teams with more interactions in a virtually face-to-face environment. Indeed, this platform helps students understand what and how various knowledge and feasible technologies can be effectively integrated to create a feasible design/solution in a practical-and-innovative approach. As such, students are inspired with a stronger desire, self-initiative, and enthusiasm for exploring their potential in innovative creations.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Ronnie SHROFF, Principal Project Fellow, Teaching and Learning Centre, Lingnan University

Abstract

In response to the COVID-19 pandemic, the University Grants Committee (UGC) and the Quality Assurance Council (QAC) allocated dedicated funding to support the strategic long-term development of virtual teaching and learning (VTL) in Hong Kong’s eight UGC-funded universities. Lingnan University, as the lead institution of a consortium of six participating universities, secured funding to establish benchmarking practices and quality assurance standards on VTL that reference internationally accepted standards within the local context. This project aims to strengthen institutional capabilities and enhance the quality of VTL provision, including online teaching and learning, distance education delivery, and technology-enhanced learning. The project involves collaboration and funding from The University of Hong Kong, The Hong Kong University of Science and Technology and the City University of Hong Kong, as well as in-kind support from The Chinese University of Hong Kong and The Hong Kong Polytechnic University. The primary objective of this project is to establish a shared quality assurance framework and standards for online learning and teaching that align with local and global standards. By adopting a collaborative approach, this project seeks to enhance the quality of VTL as a key strategic focus area of institutional development and performance improvement. This presentation will provide an overview of the project’s key objectives, methodology and outcomes. It will also discuss the challenges encountered and lessons learned in developing quality assurance and benchmarking standards for VTL across universities. Finally, the presentation will conclude with recommendations for future collaborations to enhance the quality of VTL provision within the Hong Kong higher education context.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Camomile Room, Lower Level II

Team member(s)

– Professor Alvin Chung Man LEUNG, Associate Head & Associate Professor, Department of Information Systems, City University of Hong Kong

Abstract

The COVID-19 pandemic has highlighted the critical importance of online learning, where learners must engage in self-regulated learning (SRL) to achieve optimal outcomes. Gamification interventions have been implemented to improve SRL engagement in online environments, but the mixed results of these efforts have raised doubts about their efficacy. This study investigates whether the inconsistent findings can be attributed to a lack of consideration for individual learner characteristics during gamification design. Focusing on Massive Open Online Courses (MOOCs), we examined how gamified performance feedback interacted with learners’ goal orientation, an individual trait known to influence SRL and learning. By tracking the SRL engagement of 760 college students over five weeks using learning analytics, we found that positively framed performance feedback without social comparisons increased SRL engagement and learning outcomes for participants with a strong performance-avoidance goal orientation. Conversely, the same feedback had a negative impact on participants with a strong mastery goal orientation. These findings contribute to SRL theory by demonstrating that the effectiveness of gamification in online learning is contingent on aligning the design elements with individual learner characteristics and highlight the importance of personalized gamification approaches to optimize SRL and learning in MOOC.

Theme: 1. Showcase Project Achievements

Sub-theme: Teaching Development and Language Enhancement

Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Rick KWAN, Associate Dean (Programme) & Professor, School of Nursing, Tung Wah College

Abstract

In the professionalisation of healthcare services, many healthcare professions emerged. These healthcare professions become highly specialised to care for specific health issues, although their common goal is to promote human health. In the era of the increasing complexity of diseases and health issues, knowledge from a specific profession might not suffice to solve the complex health issues of humans. However, the knowledge generated from different healthcare professions may conflict. As a result, the healthcare plans including inputs from various healthcare professions lead to incongruent treatment practices. The derived conflicts jeopardize the health outcomes of people. Interprofessional education (IPE) occurs when (learners) from two or more professions learn about, from and with each other to enable effective collaboration and health outcomes. IPE is a necessary step in preparing a “collaborative practice-ready” health workforce that is better prepared to respond to local health needs. Tung Wah College offers training for the second-largest number of healthcare professionals in Hong Kong, including nursing, physiotherapy, occupational therapy, radiotherapy, and medical laboratory science. These programmes are all accredited by the related professional regulating bodies in Hong Kong. However, interprofessional education is not a mandatory training requirement stipulated by these professional regulating bodies. Since 2023, TWC developed a Community of Practice of Healthcare Professional Health Education. We work closely together to share a common goal of strengthening interprofessional healthcare teamwork through integrated education across programmes.

Theme: 2: Thematic Exploration

Sub-theme: Community of Practice (CoP)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Jian YANG, Deputy Director of Education Technology (EdTech HKUMed), LKS Faculty of Medicine, The University of Hong Kong

Abstract

The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Camomile Room, Lower Level II

Presenter(s)

– Professor Michael BOTELHO, Clinical Professor, Restorative Dental Sciences, Faculty of Dentistry, The University of Hong Kong

– Ms Trinity JIAO, HKU SaP CoP Project Coordinator, Restorative Dental Sciences, Faculty of Dentistry, The University of Hong Kong

Abstract

The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.

Theme: 1. Showcase Project Achievements

Sub-theme: Teaching Development and Language Enhancement