Poster Presentation Time: 1225-1400; 1500-1600

Venue: F4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Mr Chun Hoi CHEUNG, Assistant Professor of Practice, School of Chinese Medicine, Hong Kong Baptist University

– Miss Hoi Yan FONG, Hong Kong Baptist University

– Miss Judith WONG, Hong Kong Baptist University

– Mr Conrad Kwan Ho CHAN, Hong Kong Baptist University

– Mr Shu Kin FONG, Hong Kong Baptist University

Abstract

Background: Led by Hong Kong Baptist University in collaboration with the University of Hong Kong, the project initiated the first-of-its-kind non-conventional simulation practicum in a realistic setting using Virtual Reality(VR) technology. Aim: The aim is to enhance students’ first-hand experiences with TCM diagnosis and consultations, thereby optimize the effectiveness of service-learning and equip students with necessary attributes such as self-learning ability and communication skills as future practitioners. Method The project encompassed (1)scriptwriting for VR development, (2)VR application with debriefing sessions held to explain the rationales of diseases and relevant physical examinations(PE) to students, and (3)skills contribution in service-learning. Numerical data was obtained through pre and post VR survey for analysis. The statistical test used was Wilcoxon signed-rank test, a paired difference test for comparing the pre-post scores of two matched samples. Post-VR focus group interviews were conducted to collect students’ views on the pros and cons of VR. Evaluation results Quantitatively, 51students completed the VR activity and responded the pre and post VR survey. Under 10-mark scoring scale with 10 as the largest extent, students’ self-evaluation on professional knowledge improved significantly. The medians of the mastery of diagnostic criteria, typical symptoms and physical examinations all increased from 6 to 7 with p<0.001. Students’ self-learning ability, understanding towards consultation procedures, technique in verbal consultation and skills in communicating with patients elevated from 6 to 7 in median, with p-values of 0.009,<0.001,<0.001 and p<0.05 respectively. Qualitatively, students mentioned in focus group that they got insights on the choices of physical examinations to be done in service-learning through VR. Yet, some students reported dizziness and nausea caused by VR headsets as the main barrier of the project, making it inapplicable to all students. Conclusion: This innovative approach is proven to improve clinical knowledge, foster self-learning ability, and develop generic attributes of students.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.1  Teaching Development and Language Enhancement Grant (TDLEG)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: J4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Beatrice CHU, Head, Professional Development, Center for Education Innovation, The Hong Kong University of Science and Technology

Abstract

The “Co-Creating the Future of Education” project, a collaborative effort led by the Hong Kong University of Science and Technology (HKUST), alongside the University of Hong Kong (HKU) and Hong Kong Baptist University (HKBU), advances the Student as Partners (SaP) approach within Hong Kong’s higher education sector. This initiative aims to transform pedagogical models by embedding student engagement in the learning process. Key objectives include enhancing professional development programs, enabling faculty and staff to collaborate effectively with students, and establishing a standardized evaluation framework to measure the impact of SaP initiatives. The project also emphasizes the creation of a Community of Practice for Student Partnership, facilitating the exchange of successful strategies and supporting ongoing SaP projects. Additionally, the Student Partnership Co-Creation Program is a cornerstone objective, fostering innovative ideas and collaborative efforts between students and faculty. Progress to date includes the successful implementation of five key focus areas: organizing professional development seminars, establishing a resource hub, and initiating the Student Partnership Co-Creation Program. Notably, 20 teams from various institutions participated in this program, yielding high satisfaction rates and valuable insights. Ultimately, this project seeks to create a sustainable, collaborative ecosystem that enhances student agency, faculty development, and curriculum innovation across participating institutions.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.1  Teaching Development and Language Enhancement Grant (TDLEG)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: J1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Professor Jeanne TAN, Professor, School of Fashion and Textiles, The Hong Kong Polytechnic University

– Dr Wing Chung WONG, Post-Doctoral Fellow, School of Fashion and Textiles, The Hong Kong Polytechnic University

Abstract

Talent development in innovation and technology is key to the sustainable development of a vibrant economy. STEM education plays a vital role in nurturing a globally competitive workforce for the future. Fostering STEM literacy at the early stages of education will equip students with the core knowledge and interdisciplinary skills for creative innovation and contributing to the future economy. Conventional education is often discipline-focused with a tendency to employ linear learning strategies which do not fully explore the knowledge opportunities present in the interdisciplinary STEM content. This often results in a skewed emphasis on technical content which young students may find difficult to contextualise in daily life. The reflective and adaptive nature of design may serve as an effective bridge to connect creativity and knowledge seeking in STEM domains (Toomey and Tan, 2018). A design-led STEM framework was adopted in two Quality Education Fund projects, reaching over 1000 secondary school students. These projects utilized fashion, artificial intelligence, and e-textiles as mediums to help students develop problem solving skills with real world applications.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Kenneth Chi-hang LO, Associate Division Head and Senior Lecturer, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University

– Dr Anthony Wai-keung LOH, Division Head and Director of Hong Kong Community College, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University,

Abstract

The learning and teaching of science and/or engineering subjects face a big challenge under the COVID-19 pandemic because all face-to-face laboratory works are suspended. Since laboratory works are essential and critical elements to science and engineering education. Teachers have tried other means to relief the effect by performing demonstration, simulation or virtual laboratory, such that experimental data can be collected for analysis afterwards. However, students commented that they cannot see and control the laboratory apparatus in “real” time. Besides, students are required to conduct experiments in a fixed schedule and usually the teaching and laboratory schedules are not synchronized, due to the limited laboratory equipment and space. Students are required to conduct the experiment before the teaching of the corresponding theory. This affects their learning experience and motivation. The proposed project aims to develop a web-based remote laboratory for science and engineering education to facilitate student independent learning and enhance their learning experience. The objectives of the project are to: (1) design the infrastructure and software specification of the remote laboratory system; (2) identify experimental sets that can be conducted remotely; (3) enhance student learning experience and engagement as “real time” operation of laboratory equipment individually or in a group at anytime and anywhere under safe and controlled environment; (4) reduce the initial investment on offering science and/or engineering programmes by other local institutions for a better development of the sector; (5) enhance collaboration between local and even overseas institutions by sharing experimental sets; (6) inspire the tertiary education sector to develop blended and online teaching modules for science and engineering subjects which required laboratory works.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: E2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Grace NGAI, Head, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Dr Stephen CHAN, Principal Project Fellow and Founding Head, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Dr Perry LEE, Manager, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Dr Angel LUO, The Hong Kong Polytechnic University

– Dr Shuheng LIN, Project Fellow, Service-Learning and Leadership Office, The Hong Kong Polytechnic University

– Mr Kenneth LO, Senior Manager, Service-Learning and Leadership Office, The Hong Kong Polytechnic University,

Abstract

In Hong Kong, internationalization is a key performance indicator for the higher education section in response to the policy goal of establishing the city as a regional education hub (University Grants Committee, 2017). Resources have been allocated to universities for various initiatives including the recruitment of international faculty and students, inter-institutional collaboration in research, and students’ overseas learning experiences. A document analysis study on 6 universities in Hong Kong showed a notable increase of institutional focus on internationalization, intercultural skills, culture, diversity, equality, and inclusion post-pandemic (Lai, 2022). Besides its contribution to global connectivity, knowledge exchange, and institutional development (Lane, 2014), internationalizing higher education is also important to prepare students for a globalized world (Egron-Polak, 2011). Given the increasing diversity within universities and societies, prioritizing the cultivation of students’ intercultural sensitivity (IS) has become essential as it enhances students’ academic and personal success and fosters harmony and development within communities. Different strategies have been implemented in higher education institutes to provide intercultural opportunities for students. These include student mobility programmes, including short and long-term immersive learning activities that bring students outside of their home country to study abroad. At the Hong Kong Polytechnic University, this includes international service-learning (ISL), with a university target of 50% of students having an ISL experience by 2027-28. In this poster presentation, we will study the impact of ISL on students’ intercultural sensitivity from multiple dimensions, including knowledge, skills, and attitudes.

Theme: 2. Thematic Exploration

Sub-theme: 2.3  Community Engaged Learning

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Dr Angela LI, Associate Professor, Division of Science, School of Medical and Health Sciences, Tung Wah College

– Dr Monica CHOW, Project Manager, Division of Science, School of Medical and Health Sciences, Tung Wah College

Abstract

Aiming to enhance the job-readiness of our students, an electronic teaching and learning kit for job-ready skill training (e-JR kit) is developed. This e-JR kit consists of three teaching modules that cover the topics of core skills needed for a paraprofessional job as a clinical assistant, including Module 1 Communication skills in the workplace, Module 2 safety and ethical issues in the workplace and Module 3 professional skills in the workplace. The regular industry involvement is a key feature of this e-JR kit project. Different industry stakeholders are continuously consulted, help with the design of real workplace scenarios, and give feedback on the effectiveness of the training. To accommodate the learning preferences of the current generation of students, the content of this e-JR kit is presented in bite-sized topics, such as case scenarios, short videos and small quizzes, and the design is highly visual and interactive. This well-designed kit will help students integrate their skills before employment, and to equip them with skills for a range of possible scenarios in the workplace. To promote the use of the e-JR kit, the completed kit will be shared with other local institutions and our industry partners in the pre-job training of their students and new staff.

Theme: 1: Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1600-1700

Venue: Rose Room, Lower Level I

Presenter(s)

– Dr Thomas LEE, Associate Professor and Associate Head (Academic) Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Dr Hin Chung LAU, Senior Lecturer, Programme Leader (BSc), and Assistant Dean (Student Development) of Faculty of Engineering, Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Ms Jessie KAR, Instructor, Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Ms Rahat BATOOL, Student, Educational Development Centre, The Hong Kong Polytechnic University

– Mr Mitesh PATEL, Educational Development Officer, Educational Development Centre, The Hong Kong Polytechnic University

– Mr Leo CHON, Assistant Educational Development Officer II, Educational Development Centre, The Hong Kong Polytechnic University,

Abstract

Students in Hong Kong have generally been perceived as passive learners, with limited opportunities for active involvement in the development of educational experiences. Here, we would like to showcase the untapped potential of students as co-creators in subject development. By harnessing the power of Student-Staff Partnership (SSP), teachers can unlock the full potential of students, creating a dynamic and enriched learning environment that benefits both the students involved and future cohorts. This presentation explores a practical approach to harnessing the power of SSP in the co-creation of an international service-learning (SL) project. The teachers encountered difficulties in adapting original local SL project to overseas because of resources limitations. By inviting students who studied the same subject in the previous year, with outstanding performance into the decision-making processes for the next cohort, this model encourages students to contribute their unique insights and ideas in redesigning the SL project. With the students’ first-hand experience and thorough understanding of the subject’s intended learning outcomes, their contribution can make the subject more impactful and aligned with the needs of students. Not only does this approach benefit the teachers by providing a deeper understanding of student needs, but it also fosters students’ personal growth and leadership development.

Theme: 2. Thematic Exploration

Sub-theme: Community Engaged Learning & Community of Practice (CoP)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: G1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Yuk Ming TANG, Senior Lecturer, Department of Indusial and System Engineering, The Hong Kong Polytechnic University

Abstract

STEM education is essential in today’s curriculum even for university students. However, traditional classroom-based instruction methods often lack interactivity and tailored experiences that foster student engagement and comprehension. The integration of Virtual Reality (VR) and Artificial Intelligence (AI) generative chatbots has emerged as a transformative influence on the teaching and learning process. Despite this, limited research has explored the impact of advanced technology on STEM learning outcomes. This study explores the potential of employing VR and AI as tools to facilitate teaching to enhance students’ learning outcomes. 120 university students are involved in this study to examine the difference in learning outcomes by utilizing three instructional approaches for learning projectile motion: (1) a traditional didactic classroom, (2) a game-based VR metaverse, and (3) a game-based VR metaverse enriched with a generative chatbot-based pedagogical agent. The study prudently evaluated alterations in student motivation, cognitive benefit, and learning outcomes. Preliminary findings suggest that incorporating VR and AI into teaching considerably enhances student engagement and cognitive participation. This study demonstrates how the integration of VR with AI can elevate student engagement, comprehension, and skill acquisition in STEM education, paving the way for a more captivating and effective learning environment in the Edu-metaverse.

Theme: 2. Thematic Exploration

Sub-theme: 2.1 Community of Practice (CoP)

Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Rick KWAN, Associate Dean (Programme) & Professor, School of Nursing, Tung Wah College

Abstract

In the professionalisation of healthcare services, many healthcare professions emerged. These healthcare professions become highly specialised to care for specific health issues, although their common goal is to promote human health. In the era of the increasing complexity of diseases and health issues, knowledge from a specific profession might not suffice to solve the complex health issues of humans. However, the knowledge generated from different healthcare professions may conflict. As a result, the healthcare plans including inputs from various healthcare professions lead to incongruent treatment practices. The derived conflicts jeopardize the health outcomes of people. Interprofessional education (IPE) occurs when (learners) from two or more professions learn about, from and with each other to enable effective collaboration and health outcomes. IPE is a necessary step in preparing a “collaborative practice-ready” health workforce that is better prepared to respond to local health needs. Tung Wah College offers training for the second-largest number of healthcare professionals in Hong Kong, including nursing, physiotherapy, occupational therapy, radiotherapy, and medical laboratory science. These programmes are all accredited by the related professional regulating bodies in Hong Kong. However, interprofessional education is not a mandatory training requirement stipulated by these professional regulating bodies. Since 2023, TWC developed a Community of Practice of Healthcare Professional Health Education. We work closely together to share a common goal of strengthening interprofessional healthcare teamwork through integrated education across programmes.

Theme: 2: Thematic Exploration

Sub-theme: Community of Practice (CoP)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: G4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Hung-lin CHI, Associate Professor, Department of Building and Real Estate, The Hong Kong Polytechnic University

– Ms Junyu CHEN, Ph.D Student, Department of Building and Real Estate, The Hong Kong Polytechnic University

– Mr Haolei LIN, Ph.D Student, Department of Building and Real Estate, The Hong Kong Polytechnic University

Abstract

KnowLearn is an interactive learning assistant system designed for architecture, engineering, and construction (AEC) education, where personalized recommendations for students in virtual learning environments remain under-explored. An educational knowledge graph (KG) was constructed to contain multifaceted information by connecting pedagogical, learning performance, and learning feedback data as sub-graphs. A heterogeneous graph attention network (HAN) was implemented to infer latent information in the educational KG and identified essential factors shaping students’ acceptance of virtual learning environments. Based on sampling data of 107 students from the Hong Kong Polytechnic University, Department of Building and Real Estate, we found students’ self-efficacy, intention to use, and in-class quiz performance were significant predictors of final learning outcomes in subjects that adopt virtual learning environments. This project further deployed a local-based large language model (LLM) Qwen-7B and built an interactive graphical user interface (GUI) with Gradio. Utilizing the information preserved in the educational KG and learned from HAN as the basis, this LLM facilitated conversations between students and KnowLearn, enhancing personalized recommendations while securing student privacy. The developed system contributed to helping improve the learning experiences and performances of AEC students within virtual learning environments.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.1  Teaching Development and Language Enhancement Grant (TDLEG)

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Ms Anna Wai Yee YUEN, Lecturer / Person-in-charge, Virtual Exchange Centre, School of Continuing Education, Hong Kong Baptist University

Abstract

Funded by the Quality Enhancement Support Scheme (QESS), the “Virtual Exchange for Authentic Teaching and Learning Innovation” project aims to establish partnerships with international tertiary institutions, equip teaching staff with Virtual Exchange (VE) skills, and promote VE as an innovative teaching pedagogy. The Virtual Exchange Centre (VEC) was established at the School of Continuing Education (SCE) in September 2022 to facilitate VE opportunities with our global partners. This presentation highlights SCE’s internationalisation efforts in VE, featuring successful course-embedded exchanges and extracurricular activities with institutions worldwide. Partnerships have been established with institutions from the U.S., U.K., Canada, Sweden, Australia, Japan, and Malaysia, with ongoing exploration of VE collaborations with potential partners from Mexico, Germany, Spain, Thailand, and India. Supported by quantitative and qualitative data, the presentation showcases the positive impact of internationalisation in VE on teaching and learning experiences. Engaging videos and compelling stories from SCE’s VE programs will be shared. In summary, the project exemplifies SCE’s commitment to enhancing education through global connection and collaboration through VE. It showcases the establishment of global partnerships, the development of VE programs, and the positive outcomes of internationalisation efforts. The presentation aims to inspire and inform the audience about the growing trend and transformative potential of VE in higher education.

Theme: 1. Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: E1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Bess Yue WANG, Senior Lecturer, Department of Journalism, School of Communication, Hong Kong Baptist University

– Dr Angela Dan WANG, Research Assistant Professor, Department of Journalism, School of Communication, Hong Kong Baptist University

Abstract

The proposed course equips students with cutting-edge skills in AI and cloud-based solutions to address real-world media management challenges faced by NGOs. Through a dynamic, experiential learning approach, students will become digitally competent, industry-ready, and socially responsible professionals. Partnering with the Institute of Endurance Science and Technology (IEST) and Huawei, the course offers a unique opportunity to bridge the gap between technological expertise and social impact. Students will gain hands-on experience by developing cloud-based solutions for IEST’s data management, publicity, and digital governance needs. The curriculum emphasizes: 1. Understanding NGO media challenges and translating them into practical cloud-based solutions. 2. Utilizing Huawei’s cloud infrastructure and receiving expert training from their engineers. 3. Developing a comprehensive cloud solution proposal addressing a real-world problem faced by IEST. Student competency will be assessed through a Huawei Cloud Practitioner certification exam and a final project proposal evaluated by industry experts and IEST. This ensures the learning experience is not only relevant but also potentially impactful, with successful proposals considered for adoption by IEST. This course exemplifies the power of technology in driving positive social change while providing students with invaluable skills for the future.

Theme: 2. Thematic Exploration

Sub-theme: 2.3  Community Engaged Learning

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Dr Edmund Tai Ming WUT, Senior Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

We aim to investigate factors affecting students’ intention to join blended learning courses in higher education sector using Community of Inquiry framework and Unified Theory of Acceptance and Use of Technology (UTAUT) model. Stimulus-Organism-Response (S-O-R) model was employed to develop a new research framework while constructs in the Community of Inquiry are Stimulus and constructs from UTAUT are considered as Organism and Response. A survey was conducted with undergraduate students in a Hong Kong higher institution. It was found that Teaching Presence (TP), Social Presence (SP) and Cognitive Presence (CP) were associated with performance expectancy, social influence and effort expectancy respectively. Performance expectancy and effort expectancy were associated with social influence. Social influence was associated with students’ attitude towards blended learning. Institution support was not related to the students’ attitude towards blended learning in the post-pandemic period. Attitude towards blended learning was associated with their behavioral intention to participate in blended learning. Online and offline tools could be adopted to improve the students’ acceptance towards the blended learning approach.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Meike SAURWEIN, Lecturer, Division of Environment and Sustainability, The Hong Kong University of Science and Technology

– Ms Evelyn Yu Shan PANG, Teaching Associate, Division of Environment and Sustainability, The Hong Kong University of Science and Technology

Abstract

In an era of complex global challenges, the need for interdisciplinary approaches in sustainability education has never been more critical. The Sustainability Education Community of Practice (SEC) aims to build on the power of interdisciplinary collaboration to foster innovative solutions and drive transformation in how we teach sustainability. SEC brings together faculty, staff and postgraduate researchers from diverse fields, including science, humanities, business, and engineering, who share a passion for teaching sustainability and an interest in innovating how we teach sustainability on campus. Our work centers on bringing together educators to form a platform for teaching collaboration, development of new teaching approaches and a network for sharing and learning. Through a serious or networking events, interactive workshops and focused support initiatives we aimed at supporting faculty and staff in developing new approaches towards teaching sustainability, discuss challenges, share tools and build up a support network. This presentation will showcase HKUST SEC’s key initiatives, including interdisciplinary workshops and collaborative teaching projects. We will highlight successful case studies that demonstrate the impact of our approach on building a community of educators who are passionate about driving sustainability. Attendees will gain insights into strategies for fostering interdisciplinary collaboration, learn about potential challenges and possibly be inspired to incorporate these practices into their own educational contexts.

Theme: 2. Thematic Exploration

Sub-theme: Community of Practice (CoP)

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Dr Peggy NG, Principal Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

With the development of innovative technology, virtual reality (VR) has become very popular and accessible to the public. There has been growing evidence that VR can influence people and change their values and behaviors. VR encourages individuals, especially teenagers, to engage in a specific behavior, such as pro-environmental behavior (PEB). Pro-environmental behavior (PEB) allowed lowering the environmental harms deliberately and substantially enhancing the future harmony. Using Value-Belief-Norm (VBN) theory, the present study aims to examine the relationship between teenagers’ perceived values and pro-environmental behavioral intention in VR platforms. Students (N = 120) were invited to visit the VR lab for an immersive experience focused on carbon footprint. The results showed that hedonic value predicts pro-environmental intention, whereas altruistic value predicts awareness of responsibility of individuals. The findings of the study will contribute to both theoretical and practical contributions. From practical perspectives, integrating VR into sustainability education can enhance student engagement by providing immersive and interactive VR experiences. This innovative approach of teaching fosters students’ pro-environmental intention, raising awareness of personal responsibility in caring for the environment. By incorporating VR elements into programme development, higher education institutions can better equip students with the knowledge in sustainability to address future environmental challenges.

Theme: 1. Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)