- Reset all ×
- Hong Kong Baptist University ×
- The University of Hong Kong ×
- 1. Showcase Project Achievements ×
- 1.1 Teaching Development and Language Enhancement Grant (TDLEG) ×
- 1.3 Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL) ×
- 2.3 Community Engaged Learning ×
- 2.4 Whole-Person Development ×
Filter Presentations
6 posts found
Poster Presentation Time: 1225-1400; 1500-1600
Venue: F4, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Mr Chun Hoi CHEUNG, Assistant Professor of Practice, School of Chinese Medicine, Hong Kong Baptist University
– Miss Hoi Yan FONG, Hong Kong Baptist University
– Miss Judith WONG, Hong Kong Baptist University
– Mr Conrad Kwan Ho CHAN, Hong Kong Baptist University
– Mr Shu Kin FONG, Hong Kong Baptist University
Abstract
Background: Led by Hong Kong Baptist University in collaboration with the University of Hong Kong, the project initiated the first-of-its-kind non-conventional simulation practicum in a realistic setting using Virtual Reality(VR) technology. Aim: The aim is to enhance students’ first-hand experiences with TCM diagnosis and consultations, thereby optimize the effectiveness of service-learning and equip students with necessary attributes such as self-learning ability and communication skills as future practitioners. Method The project encompassed (1)scriptwriting for VR development, (2)VR application with debriefing sessions held to explain the rationales of diseases and relevant physical examinations(PE) to students, and (3)skills contribution in service-learning. Numerical data was obtained through pre and post VR survey for analysis. The statistical test used was Wilcoxon signed-rank test, a paired difference test for comparing the pre-post scores of two matched samples. Post-VR focus group interviews were conducted to collect students’ views on the pros and cons of VR. Evaluation results Quantitatively, 51students completed the VR activity and responded the pre and post VR survey. Under 10-mark scoring scale with 10 as the largest extent, students’ self-evaluation on professional knowledge improved significantly. The medians of the mastery of diagnostic criteria, typical symptoms and physical examinations all increased from 6 to 7 with p<0.001. Students’ self-learning ability, understanding towards consultation procedures, technique in verbal consultation and skills in communicating with patients elevated from 6 to 7 in median, with p-values of 0.009,<0.001,<0.001 and p<0.05 respectively. Qualitatively, students mentioned in focus group that they got insights on the choices of physical examinations to be done in service-learning through VR. Yet, some students reported dizziness and nausea caused by VR headsets as the main barrier of the project, making it inapplicable to all students. Conclusion: This innovative approach is proven to improve clinical knowledge, foster self-learning ability, and develop generic attributes of students.
Theme: 1: Showcase Project Achievements
Sub-theme: 1.1 Teaching Development and Language Enhancement Grant (TDLEG)
Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400;1500-1600
Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: H1, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Ir Dr H H CHEUNG, Senior Lecturer, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong
– Mr Derek TONG, Tutor, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong
– Mr Like WEN, Research Assistant, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong
Abstract
The past social events and COVID-19 pandemic posed huge challenges to teaching and learning. The teaching team seized these challenges as opportunities to develop and incorporate e-learning in experiential projects and capstone courses, which otherwise mandate intensive face-to-face interactions. The team has developed the Digital Design House – An e-learning platform for collaborative product development – to facilitate experiential learning and hands-on projects in various courses that carry substantial components of innovative product design and development. The Digital Design House is a cloud-based experiential e-learning platform that provides remote access to CAD facilities for students to interact among group members and with teachers in virtual environments to share their ideas for product design and development. This e-learning platform integrates a set of advanced information and computing, 3D Hologram devices, virtual reality, mixed reality, and mobile devices with a suite of in-house developed applications for stereoscopic visualisation of virtual objects in an immersive virtual environment to facilitate systematic training and development of students’ innovative abilities through experiential learning. It not only allows students at different geographical regions and teachers to ubiquitously conduct teaching and learning, but also facilitates online lectures via video conferencing like Zoom or Microsoft Teams with more interactions in a virtually face-to-face environment. Indeed, this platform helps students understand what and how various knowledge and feasible technologies can be effectively integrated to create a feasible design/solution in a practical-and-innovative approach. As such, students are inspired with a stronger desire, self-initiative, and enthusiasm for exploring their potential in innovative creations.
Theme: 1. Showcase Project Achievements
Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)
Poster Presentation Time: 1225-1400; 1500-1600
Venue: G3, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Professor Fraide A. Jr GANOTICE, Assistant Professor, Bau Institute of Medical and Health Sciences Education, Li Ka Shing Faculty of Medicine, The University of Hong Kong
Abstract
Disciplinary silos often perpetuate hierarchical relationships and competition, creating a significant barrier to teamwork and collaboration in healthcare. Students who are exclusively trained within the confines of their discipline and university miss out on opportunities to develop the interprofessional competencies necessary for managing complex medical conditions of patients. Therefore, cross-institutional interprofessional education is crucial to promote the sharing of expertise among professionals from different universities and to prepare students for clinical practice. This presentation will highlight the significant achievements of the project titled “Promoting cross-institutional collaboration through interprofessional education: Forging alliances in healthcare education.” Initiated by the University of Hong Kong (HKU) in partnership with the Hong Kong Polytechnic University (PolyU), this innovative project aims to break down educational silos and foster interprofessional competencies among healthcare students. The project’s core objective is to enhance patient-centered care by developing and implementing a model of interprofessional education that integrates various healthcare disciplines. Throughout the four phases of the project—Program Development, Pilot Testing, Actual Implementation, and Evaluation and Dissemination—numerous achievements have been documented. These include the successful integration of interprofessional education into the curricula, enhanced collaborative competencies among students. The project also pioneered the development of an evidence-based cross-institutional IPE Model, setting a benchmark for future educational endeavors in the healthcare sector. This presentation will delve into the methodologies employed, the collaborative initiatives between HKU and PolyU, and the positive impact on healthcare education highlighted by reduced medical errors and improved healthcare outcomes. By showcasing these achievements, the session aims to inspire continued progress in interprofessional education and collaboration across healthcare institutions globally.
Theme: 1: Showcase Project Achievements
Sub-theme: 1.1 Teaching Development and Language Enhancement Grant (TDLEG)
Oral Presentation Time: 1400-1500
Venue: Rose Room, Lower Level II
Presenter(s)
– Dr Jian YANG, Deputy Director of Education Technology (EdTech HKUMed), LKS Faculty of Medicine, The University of Hong Kong
Abstract
The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.
Theme: 1. Showcase Project Achievements
Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)
Oral Presentation Time: 1400-1500
Venue: Camomile Room, Lower Level II
Presenter(s)
– Professor Michael BOTELHO, Clinical Professor, Restorative Dental Sciences, Faculty of Dentistry, The University of Hong Kong
– Ms Trinity JIAO, HKU SaP CoP Project Coordinator, Restorative Dental Sciences, Faculty of Dentistry, The University of Hong Kong
Abstract
The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.
Theme: 1. Showcase Project Achievements
Sub-theme: Teaching Development and Language Enhancement
Poster Presentation Time: 1225-1400; 1500-1600
Venue: H3, Tai Po-Shek-O Room, Lower Level I
Presenter(s)
– Dr Henry Tsz Yeung FUNG, Lecturer cum Programme Director of ORGC Concentration, Communication Studies, Hong Kong Baptist University
Abstract
The outbreak of the COVID-19 pandemic had a profound impact on university students’ learning, necessitating a sudden shift from face-to-face learning to virtual learning. This sudden shift disrupted student-teacher interactions and cut off access to vital resources like libraries and media labs, leaving students scrambling in an unfamiliar digital landscape. Recognizing the need for accessible learning tools in these uncertain times, this study centres on the curation of a digital video archive featuring exemplary student works to facilitate peer-to-peer learning in the context of the COVID-19 pandemic. Fifty high-achieving students majoring in communication were invited to discuss their learning experiences and the processes involved in creating distinct class projects. These interviews were then turned into thirty short peer-learning videos and stored in a digital archive. The archive was advertised to over 200 students via mass email, in-class promotions, and school web pages during the Fall 2022 and Spring 2023 semesters. To gain a better understanding of student engagement with the digital archive as a means of active learning and knowledge construction, three focus group interviews were conducted. Findings reveal that the archive positively impacts student learning by providing an accessible, flexible platform for understanding course materials outside of the traditional classroom setting. This is particularly useful during the add/drop period when students want to learn more about the course before enrolment. Additionally, the peer advice and work samples shared in the videos provide a grounded perspective on instructor expectations, hence enabling students to produce higher-quality work.