Poster Presentation Time: 1225-1400; 1500-1600

Venue: H2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Pauli LAI, Lecturer, Department of Electrical and Electronic Engineering, The Hong Kong Polytechnic University

– Dr Julia CHEN, Director, Educational Development Centre, The Hong Kong Polytechnic University

Abstract

A common assessment in university is the oral presentation, and students are often required to deliver presentations in English. Two challenges arise. First, many students mainly focus on the discipline content in the assessment preparation process rather than the communication or use of English in their presentations. Second, lecturers of large classes (e.g. around 200 engineering students in one course) hardly have time to give feedback to each student on the English communication aspect of their oral presentations. A baseline survey reveals students’ need for assistance with presentation skills and a hope for having AI-generated feedback among both students and discipline teachers. To address these needs and hope, a team of educators from PolyU and BU with expertise in language and AI technology collaboratively developed an online English oral presentation platform called SmartPresenter. SmartPresenter provides students with presentation tips, learning materials, and extensive AI-generated feedback on the communication-related aspects of delivering oral presentations in English, including eye contact, facial expressions, vocal fillers, pronunciation, and fluency. This presentation describes the development and features of SmartPresenter, and the evaluation results of the effectiveness of the platform in facilitating independent learning practices for English oral presentations and assisting teachers in grading presentation assessment.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: J1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Professor Jeanne TAN, Professor, School of Fashion and Textiles, The Hong Kong Polytechnic University

– Dr Wing Chung WONG, Post-Doctoral Fellow, School of Fashion and Textiles, The Hong Kong Polytechnic University

Abstract

Talent development in innovation and technology is key to the sustainable development of a vibrant economy. STEM education plays a vital role in nurturing a globally competitive workforce for the future. Fostering STEM literacy at the early stages of education will equip students with the core knowledge and interdisciplinary skills for creative innovation and contributing to the future economy. Conventional education is often discipline-focused with a tendency to employ linear learning strategies which do not fully explore the knowledge opportunities present in the interdisciplinary STEM content. This often results in a skewed emphasis on technical content which young students may find difficult to contextualise in daily life. The reflective and adaptive nature of design may serve as an effective bridge to connect creativity and knowledge seeking in STEM domains (Toomey and Tan, 2018). A design-led STEM framework was adopted in two Quality Education Fund projects, reaching over 1000 secondary school students. These projects utilized fashion, artificial intelligence, and e-textiles as mediums to help students develop problem solving skills with real world applications.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: B1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Miss Eunice Yuen Man CHAU, Senior Research Assistant, Department of Geography, Asian Energy Studies Centre, Hong Kong Baptist University

– Mr Andy Wei Hei SIU, Senior Research Assistant, MPhil student, Department of Geography, Asian Energy Studies Centre, Hong Kong Baptist University

Abstract

In this digital era, the learning model of higher education students has been reshaping due to emerging social structures and technological forces in a smart society, alongside the COVID-19 pandemic. Previous research has shown that there are several barriers to the implementation of research-based learning and teaching (RBLT) from the perspective of both students and teachers that are insufficient to cope with the changes in the present, and community-based learning that utilises the community as living laboratories seems to be a feasible solution. This research aims to develop a novel model of RBLT, adopting a train-the-trainer approach for over 70 student interns across local universities, and establishing a five-tiered organisational structure to comprehensively evaluate their positive changes in all sub-themes in Cognitive (knowledge-based), Psychomotor (action-based), and Affective (emotion-based) domains. Research data were collected from more than 70 events supported by trained student interns serving over 2,000 participants in our four research communities and partner schools. The research indicated that the impact of the model of community-based RBLT went beyond enhanced teaching and learning effectiveness for students and teachers. The combination of online and physical learning experiences also created synergies between learning and teaching.

Theme: 2. Thematic Exploration

Sub-theme: 2.1 Community of Practice (CoP)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Kenneth Chi-hang LO, Associate Division Head and Senior Lecturer, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University

– Dr Anthony Wai-keung LOH, Division Head and Director of Hong Kong Community College, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University,

Abstract

The learning and teaching of science and/or engineering subjects face a big challenge under the COVID-19 pandemic because all face-to-face laboratory works are suspended. Since laboratory works are essential and critical elements to science and engineering education. Teachers have tried other means to relief the effect by performing demonstration, simulation or virtual laboratory, such that experimental data can be collected for analysis afterwards. However, students commented that they cannot see and control the laboratory apparatus in “real” time. Besides, students are required to conduct experiments in a fixed schedule and usually the teaching and laboratory schedules are not synchronized, due to the limited laboratory equipment and space. Students are required to conduct the experiment before the teaching of the corresponding theory. This affects their learning experience and motivation. The proposed project aims to develop a web-based remote laboratory for science and engineering education to facilitate student independent learning and enhance their learning experience. The objectives of the project are to: (1) design the infrastructure and software specification of the remote laboratory system; (2) identify experimental sets that can be conducted remotely; (3) enhance student learning experience and engagement as “real time” operation of laboratory equipment individually or in a group at anytime and anywhere under safe and controlled environment; (4) reduce the initial investment on offering science and/or engineering programmes by other local institutions for a better development of the sector; (5) enhance collaboration between local and even overseas institutions by sharing experimental sets; (6) inspire the tertiary education sector to develop blended and online teaching modules for science and engineering subjects which required laboratory works.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400;1500-1600

Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: H1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Ir Dr H H CHEUNG, Senior Lecturer, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Derek TONG, Tutor, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Like WEN, Research Assistant, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

Abstract

The past social events and COVID-19 pandemic posed huge challenges to teaching and learning. The teaching team seized these challenges as opportunities to develop and incorporate e-learning in experiential projects and capstone courses, which otherwise mandate intensive face-to-face interactions. The team has developed the Digital Design House – An e-learning platform for collaborative product development – to facilitate experiential learning and hands-on projects in various courses that carry substantial components of innovative product design and development. The Digital Design House is a cloud-based experiential e-learning platform that provides remote access to CAD facilities for students to interact among group members and with teachers in virtual environments to share their ideas for product design and development. This e-learning platform integrates a set of advanced information and computing, 3D Hologram devices, virtual reality, mixed reality, and mobile devices with a suite of in-house developed applications for stereoscopic visualisation of virtual objects in an immersive virtual environment to facilitate systematic training and development of students’ innovative abilities through experiential learning. It not only allows students at different geographical regions and teachers to ubiquitously conduct teaching and learning, but also facilitates online lectures via video conferencing like Zoom or Microsoft Teams with more interactions in a virtually face-to-face environment. Indeed, this platform helps students understand what and how various knowledge and feasible technologies can be effectively integrated to create a feasible design/solution in a practical-and-innovative approach. As such, students are inspired with a stronger desire, self-initiative, and enthusiasm for exploring their potential in innovative creations.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1600-1700

Venue: Rose Room, Lower Level I

Presenter(s)

– Dr Thomas LEE, Associate Professor and Associate Head (Academic) Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Dr Hin Chung LAU, Senior Lecturer, Programme Leader (BSc), and Assistant Dean (Student Development) of Faculty of Engineering, Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Ms Jessie KAR, Instructor, Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Ms Rahat BATOOL, Student, Educational Development Centre, The Hong Kong Polytechnic University

– Mr Mitesh PATEL, Educational Development Officer, Educational Development Centre, The Hong Kong Polytechnic University

– Mr Leo CHON, Assistant Educational Development Officer II, Educational Development Centre, The Hong Kong Polytechnic University,

Abstract

Students in Hong Kong have generally been perceived as passive learners, with limited opportunities for active involvement in the development of educational experiences. Here, we would like to showcase the untapped potential of students as co-creators in subject development. By harnessing the power of Student-Staff Partnership (SSP), teachers can unlock the full potential of students, creating a dynamic and enriched learning environment that benefits both the students involved and future cohorts. This presentation explores a practical approach to harnessing the power of SSP in the co-creation of an international service-learning (SL) project. The teachers encountered difficulties in adapting original local SL project to overseas because of resources limitations. By inviting students who studied the same subject in the previous year, with outstanding performance into the decision-making processes for the next cohort, this model encourages students to contribute their unique insights and ideas in redesigning the SL project. With the students’ first-hand experience and thorough understanding of the subject’s intended learning outcomes, their contribution can make the subject more impactful and aligned with the needs of students. Not only does this approach benefit the teachers by providing a deeper understanding of student needs, but it also fosters students’ personal growth and leadership development.

Theme: 2. Thematic Exploration

Sub-theme: Community Engaged Learning & Community of Practice (CoP)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: G1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Yuk Ming TANG, Senior Lecturer, Department of Indusial and System Engineering, The Hong Kong Polytechnic University

Abstract

STEM education is essential in today’s curriculum even for university students. However, traditional classroom-based instruction methods often lack interactivity and tailored experiences that foster student engagement and comprehension. The integration of Virtual Reality (VR) and Artificial Intelligence (AI) generative chatbots has emerged as a transformative influence on the teaching and learning process. Despite this, limited research has explored the impact of advanced technology on STEM learning outcomes. This study explores the potential of employing VR and AI as tools to facilitate teaching to enhance students’ learning outcomes. 120 university students are involved in this study to examine the difference in learning outcomes by utilizing three instructional approaches for learning projectile motion: (1) a traditional didactic classroom, (2) a game-based VR metaverse, and (3) a game-based VR metaverse enriched with a generative chatbot-based pedagogical agent. The study prudently evaluated alterations in student motivation, cognitive benefit, and learning outcomes. Preliminary findings suggest that incorporating VR and AI into teaching considerably enhances student engagement and cognitive participation. This study demonstrates how the integration of VR with AI can elevate student engagement, comprehension, and skill acquisition in STEM education, paving the way for a more captivating and effective learning environment in the Edu-metaverse.

Theme: 2. Thematic Exploration

Sub-theme: 2.1 Community of Practice (CoP)

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Ms Anna Wai Yee YUEN, Lecturer / Person-in-charge, Virtual Exchange Centre, School of Continuing Education, Hong Kong Baptist University

Abstract

Funded by the Quality Enhancement Support Scheme (QESS), the “Virtual Exchange for Authentic Teaching and Learning Innovation” project aims to establish partnerships with international tertiary institutions, equip teaching staff with Virtual Exchange (VE) skills, and promote VE as an innovative teaching pedagogy. The Virtual Exchange Centre (VEC) was established at the School of Continuing Education (SCE) in September 2022 to facilitate VE opportunities with our global partners. This presentation highlights SCE’s internationalisation efforts in VE, featuring successful course-embedded exchanges and extracurricular activities with institutions worldwide. Partnerships have been established with institutions from the U.S., U.K., Canada, Sweden, Australia, Japan, and Malaysia, with ongoing exploration of VE collaborations with potential partners from Mexico, Germany, Spain, Thailand, and India. Supported by quantitative and qualitative data, the presentation showcases the positive impact of internationalisation in VE on teaching and learning experiences. Engaging videos and compelling stories from SCE’s VE programs will be shared. In summary, the project exemplifies SCE’s commitment to enhancing education through global connection and collaboration through VE. It showcases the establishment of global partnerships, the development of VE programs, and the positive outcomes of internationalisation efforts. The presentation aims to inspire and inform the audience about the growing trend and transformative potential of VE in higher education.

Theme: 1. Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Dr Edmund Tai Ming WUT, Senior Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

We aim to investigate factors affecting students’ intention to join blended learning courses in higher education sector using Community of Inquiry framework and Unified Theory of Acceptance and Use of Technology (UTAUT) model. Stimulus-Organism-Response (S-O-R) model was employed to develop a new research framework while constructs in the Community of Inquiry are Stimulus and constructs from UTAUT are considered as Organism and Response. A survey was conducted with undergraduate students in a Hong Kong higher institution. It was found that Teaching Presence (TP), Social Presence (SP) and Cognitive Presence (CP) were associated with performance expectancy, social influence and effort expectancy respectively. Performance expectancy and effort expectancy were associated with social influence. Social influence was associated with students’ attitude towards blended learning. Institution support was not related to the students’ attitude towards blended learning in the post-pandemic period. Attitude towards blended learning was associated with their behavioral intention to participate in blended learning. Online and offline tools could be adopted to improve the students’ acceptance towards the blended learning approach.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Jian YANG, Deputy Director of Education Technology (EdTech HKUMed), LKS Faculty of Medicine, The University of Hong Kong

Abstract

The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: H3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Henry Tsz Yeung FUNG, Lecturer cum Programme Director of ORGC Concentration, Communication Studies, Hong Kong Baptist University

Abstract

The outbreak of the COVID-19 pandemic had a profound impact on university students’ learning, necessitating a sudden shift from face-to-face learning to virtual learning. This sudden shift disrupted student-teacher interactions and cut off access to vital resources like libraries and media labs, leaving students scrambling in an unfamiliar digital landscape. Recognizing the need for accessible learning tools in these uncertain times, this study centres on the curation of a digital video archive featuring exemplary student works to facilitate peer-to-peer learning in the context of the COVID-19 pandemic. Fifty high-achieving students majoring in communication were invited to discuss their learning experiences and the processes involved in creating distinct class projects. These interviews were then turned into thirty short peer-learning videos and stored in a digital archive. The archive was advertised to over 200 students via mass email, in-class promotions, and school web pages during the Fall 2022 and Spring 2023 semesters. To gain a better understanding of student engagement with the digital archive as a means of active learning and knowledge construction, three focus group interviews were conducted. Findings reveal that the archive positively impacts student learning by providing an accessible, flexible platform for understanding course materials outside of the traditional classroom setting. This is particularly useful during the add/drop period when students want to learn more about the course before enrolment. Additionally, the peer advice and work samples shared in the videos provide a grounded perspective on instructor expectations, hence enabling students to produce higher-quality work.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Dr Peggy NG, Principal Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

With the development of innovative technology, virtual reality (VR) has become very popular and accessible to the public. There has been growing evidence that VR can influence people and change their values and behaviors. VR encourages individuals, especially teenagers, to engage in a specific behavior, such as pro-environmental behavior (PEB). Pro-environmental behavior (PEB) allowed lowering the environmental harms deliberately and substantially enhancing the future harmony. Using Value-Belief-Norm (VBN) theory, the present study aims to examine the relationship between teenagers’ perceived values and pro-environmental behavioral intention in VR platforms. Students (N = 120) were invited to visit the VR lab for an immersive experience focused on carbon footprint. The results showed that hedonic value predicts pro-environmental intention, whereas altruistic value predicts awareness of responsibility of individuals. The findings of the study will contribute to both theoretical and practical contributions. From practical perspectives, integrating VR into sustainability education can enhance student engagement by providing immersive and interactive VR experiences. This innovative approach of teaching fosters students’ pro-environmental intention, raising awareness of personal responsibility in caring for the environment. By incorporating VR elements into programme development, higher education institutions can better equip students with the knowledge in sustainability to address future environmental challenges.

Theme: 1. Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)