Poster Presentation Time: 1225-1400; 1500-1600

Venue: H2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Pauli LAI, Lecturer, Department of Electrical and Electronic Engineering, The Hong Kong Polytechnic University

– Dr Julia CHEN, Director, Educational Development Centre, The Hong Kong Polytechnic University

Abstract

A common assessment in university is the oral presentation, and students are often required to deliver presentations in English. Two challenges arise. First, many students mainly focus on the discipline content in the assessment preparation process rather than the communication or use of English in their presentations. Second, lecturers of large classes (e.g. around 200 engineering students in one course) hardly have time to give feedback to each student on the English communication aspect of their oral presentations. A baseline survey reveals students’ need for assistance with presentation skills and a hope for having AI-generated feedback among both students and discipline teachers. To address these needs and hope, a team of educators from PolyU and BU with expertise in language and AI technology collaboratively developed an online English oral presentation platform called SmartPresenter. SmartPresenter provides students with presentation tips, learning materials, and extensive AI-generated feedback on the communication-related aspects of delivering oral presentations in English, including eye contact, facial expressions, vocal fillers, pronunciation, and fluency. This presentation describes the development and features of SmartPresenter, and the evaluation results of the effectiveness of the platform in facilitating independent learning practices for English oral presentations and assisting teachers in grading presentation assessment.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Aftab AMIN, Teaching Associate, Division of Life Science, The Hong Kong University of Science and Technology

Abstract

Virtual Reality (VR), Augmented Reality (AR) and Mixed Reality (MR) empower educators to develop active-learning pedagogical approaches that motivate students to simultaneously engage, develop knowledge, social skills, and subject interest. To initiate VR/AR learning at the Division of Life Science (LIFS), HKUST, LIFS1904 Laboratory for General Biology II (comprising four experiments, ~300 diverse learners) was selected. In recent years, increasing enrollment has created manpower and space shortages, while post-pandemic issues have made student learning and the acquisition of resources, such as rat cadavers for teaching anatomy, physiology, and dissection more challenging. To address pressing issues, enhance active-learning, and make practical transitions fluid and cohesive, gamification is being used to develop a customizable, Virtual Reality Platform (VRP). A story-based narrative has also been implemented to create immersive, engaging, memorable and impactful pedagogy. In this presentation we will examine the deliverables of the project. Some of the findings from our student surveys, focus groups and interviews will also be shared to provide a better understanding of how technology-driven pedagogical innovations can facilitate active learning, information literacy, enhance student support, and facilitate peer-teaching, so that graduate attributes can be delivered.

Theme: 1: Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Carmen WONG, Assistant Dean (Faculty Development) and Clinical Professional Consultant, The Jockey Club School of Public Health and Primary Care, Faculty of Medicine, The Chinese University of Hong Kong

Abstract

Many industries have adopted design thinking as a powerful approach to problem-solving and innovation. A Community of Practice on Design Thinking can enhance experience sharing, ideas development and collectively enrich design thinking capabilities. For educators this can facilitate sharing of curricula concerns and problems, topical interests, and deepen their knowledge and experience of design thinking in education. The HKTEA Design Thinking Community of Practice in Higher Education was established in November 2023. The presentation aims to explore the process and challenges of setting up a community of practice on design thinking within the education arena. The session will begin by providing an overview of community of practice and design thinking considerations. The journey in setting up the Design Thinking community of practice from developing design thinking educational resources, exploring educator challenges in different institutions and disciplines and fostering network and exchange will be discussed. Key steps involved in establishing a community of practice and ongoing development will be highlighted. Attendees will be equipped with practical insights and actionable strategies to initiate and nurture a community of practice in their own and/or across institutions.

Theme: 2. Thematic Exploration

Sub-theme: Community of Practice (CoP)

Oral Presentation Time: 1400-1500
Poster Presentation Time: 1225-1400;1500-1600

Oral Presentation Venue: Rose Room, Lower Level II
Poster Presentation Venue: H1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Ir Dr H H CHEUNG, Senior Lecturer, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Derek TONG, Tutor, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

– Mr Like WEN, Research Assistant, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong

Abstract

The past social events and COVID-19 pandemic posed huge challenges to teaching and learning. The teaching team seized these challenges as opportunities to develop and incorporate e-learning in experiential projects and capstone courses, which otherwise mandate intensive face-to-face interactions. The team has developed the Digital Design House – An e-learning platform for collaborative product development – to facilitate experiential learning and hands-on projects in various courses that carry substantial components of innovative product design and development. The Digital Design House is a cloud-based experiential e-learning platform that provides remote access to CAD facilities for students to interact among group members and with teachers in virtual environments to share their ideas for product design and development. This e-learning platform integrates a set of advanced information and computing, 3D Hologram devices, virtual reality, mixed reality, and mobile devices with a suite of in-house developed applications for stereoscopic visualisation of virtual objects in an immersive virtual environment to facilitate systematic training and development of students’ innovative abilities through experiential learning. It not only allows students at different geographical regions and teachers to ubiquitously conduct teaching and learning, but also facilitates online lectures via video conferencing like Zoom or Microsoft Teams with more interactions in a virtually face-to-face environment. Indeed, this platform helps students understand what and how various knowledge and feasible technologies can be effectively integrated to create a feasible design/solution in a practical-and-innovative approach. As such, students are inspired with a stronger desire, self-initiative, and enthusiasm for exploring their potential in innovative creations.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: L6, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Professor Gladys Wai Lan TANG, Centre Director, Centre for Sign Linguistics and Deaf Studies, The Chinese University of Hong Kong – Mr Jafi YF LEE, Research Associate, Centre for Sign Linguistics and Deaf Studies, The Chinese University of Hong Kong – Dr Chris KM YIU, Senior Programme Officer, Centre for Sign Linguistics and Deaf Studies, The Chinese University of Hong Kong

Abstract

The Centre for Sign Linguistics and Deaf Studies is building a Community of Practice to support deaf and hard-of-hearing (d/hh) students pursuing tertiary education. The d/hh students face different barriers to information accessibility because of their diverse backgrounds and learning needs. Possible types of educational support including captioning & AI summaries, subtitles for videos, note-taking/stenography, wireless transmission system, sign interpretation, and other accommodations should be explored to address their respective needs. The project will lead to 1) an improved understanding of the learning needs of the d/hh students, 2) a raised awareness of the physical learning environment/hardware accommodations, 3) the development of new teaching strategies and practices, 4) the deployment of new tools and aids, and 5) the design of a support system with accommodation for in-class and course-end assessments. The project will host seminars to facilitate the dissemination of effective strategies for supporting d/hh students among members of the CoP. The ultimate goal is to recommend an effective and operable support system to EDB and UGC.

Theme: 2. Thematic Exploration

Sub-theme: 2.1 Community of Practice (CoP)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: H4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Mr Isaac Ka Chun WAN, Instructional Designer, Centre for Education Innovation, The Hong Kong University of Science and Technology

Abstract

The use of videos in asynchronous learning significantly enhances the educational experience, especially for intricate or abstract concepts. Videos allow students to adapt their learning pace, fostering a more flexible and personalized process. However, traditional video lectures often promote passive learning, making it hard for instructors to monitor students’ progress effectively. To address these challenges and help instructors create an interactive video-based learning environment, a strategic workflow has been developed. This workflow incorporates two customized digital tools that facilitate the creation of engaging video elements and provide detailed analytics on student engagement and progress. As a result, students are empowered in their asynchronous learning journey.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1600-1700

Venue: Rose Room, Lower Level I

Presenter(s)

– Dr Thomas LEE, Associate Professor and Associate Head (Academic) Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Dr Hin Chung LAU, Senior Lecturer, Programme Leader (BSc), and Assistant Dean (Student Development) of Faculty of Engineering, Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Ms Jessie KAR, Instructor, Department of Biomedical Engineering, The Hong Kong Polytechnic University

– Ms Rahat BATOOL, Student, Educational Development Centre, The Hong Kong Polytechnic University

– Mr Mitesh PATEL, Educational Development Officer, Educational Development Centre, The Hong Kong Polytechnic University

– Mr Leo CHON, Assistant Educational Development Officer II, Educational Development Centre, The Hong Kong Polytechnic University,

Abstract

Students in Hong Kong have generally been perceived as passive learners, with limited opportunities for active involvement in the development of educational experiences. Here, we would like to showcase the untapped potential of students as co-creators in subject development. By harnessing the power of Student-Staff Partnership (SSP), teachers can unlock the full potential of students, creating a dynamic and enriched learning environment that benefits both the students involved and future cohorts. This presentation explores a practical approach to harnessing the power of SSP in the co-creation of an international service-learning (SL) project. The teachers encountered difficulties in adapting original local SL project to overseas because of resources limitations. By inviting students who studied the same subject in the previous year, with outstanding performance into the decision-making processes for the next cohort, this model encourages students to contribute their unique insights and ideas in redesigning the SL project. With the students’ first-hand experience and thorough understanding of the subject’s intended learning outcomes, their contribution can make the subject more impactful and aligned with the needs of students. Not only does this approach benefit the teachers by providing a deeper understanding of student needs, but it also fosters students’ personal growth and leadership development.

Theme: 2. Thematic Exploration

Sub-theme: Community Engaged Learning & Community of Practice (CoP)

Poster Presentation Time: 1500-1600; 1700-1800

Venue: G1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Yuk Ming TANG, Senior Lecturer, Department of Indusial and System Engineering, The Hong Kong Polytechnic University

Abstract

STEM education is essential in today’s curriculum even for university students. However, traditional classroom-based instruction methods often lack interactivity and tailored experiences that foster student engagement and comprehension. The integration of Virtual Reality (VR) and Artificial Intelligence (AI) generative chatbots has emerged as a transformative influence on the teaching and learning process. Despite this, limited research has explored the impact of advanced technology on STEM learning outcomes. This study explores the potential of employing VR and AI as tools to facilitate teaching to enhance students’ learning outcomes. 120 university students are involved in this study to examine the difference in learning outcomes by utilizing three instructional approaches for learning projectile motion: (1) a traditional didactic classroom, (2) a game-based VR metaverse, and (3) a game-based VR metaverse enriched with a generative chatbot-based pedagogical agent. The study prudently evaluated alterations in student motivation, cognitive benefit, and learning outcomes. Preliminary findings suggest that incorporating VR and AI into teaching considerably enhances student engagement and cognitive participation. This study demonstrates how the integration of VR with AI can elevate student engagement, comprehension, and skill acquisition in STEM education, paving the way for a more captivating and effective learning environment in the Edu-metaverse.

Theme: 2. Thematic Exploration

Sub-theme: 2.1 Community of Practice (CoP)

Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Rick KWAN, Associate Dean (Programme) & Professor, School of Nursing, Tung Wah College

Abstract

In the professionalisation of healthcare services, many healthcare professions emerged. These healthcare professions become highly specialised to care for specific health issues, although their common goal is to promote human health. In the era of the increasing complexity of diseases and health issues, knowledge from a specific profession might not suffice to solve the complex health issues of humans. However, the knowledge generated from different healthcare professions may conflict. As a result, the healthcare plans including inputs from various healthcare professions lead to incongruent treatment practices. The derived conflicts jeopardize the health outcomes of people. Interprofessional education (IPE) occurs when (learners) from two or more professions learn about, from and with each other to enable effective collaboration and health outcomes. IPE is a necessary step in preparing a “collaborative practice-ready” health workforce that is better prepared to respond to local health needs. Tung Wah College offers training for the second-largest number of healthcare professionals in Hong Kong, including nursing, physiotherapy, occupational therapy, radiotherapy, and medical laboratory science. These programmes are all accredited by the related professional regulating bodies in Hong Kong. However, interprofessional education is not a mandatory training requirement stipulated by these professional regulating bodies. Since 2023, TWC developed a Community of Practice of Healthcare Professional Health Education. We work closely together to share a common goal of strengthening interprofessional healthcare teamwork through integrated education across programmes.

Theme: 2: Thematic Exploration

Sub-theme: Community of Practice (CoP)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Jian YANG, Deputy Director of Education Technology (EdTech HKUMed), LKS Faculty of Medicine, The University of Hong Kong

Abstract

The “Students as Partners (SaP)” support framework fosters active interdisciplinary collaboration. Key initiatives undertaken by the Students as Partners Community of Practice (SaP CoP) involve organizing seminar-sharing sessions, hosting internal CoP meetings, and conducting formal consultation sessions for those initiating SaP projects. These efforts offer valuable learning opportunities and continuous support for both educators and students. At HKU, the SaP CoP has developed a Scope, Process, and Levels framework for SaP activities. In partnership with TALIC, the SaP CoP has established a dedicated webpage and featured it in the HKU bulletin. These initiatives have been well-received by students and staff alike, providing meaningful experiences and practical guidelines that significantly contribute to their learning and engagement journey.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1600-1700

Venue: Fanling Room, Lower Level I

Presenter(s)

– Professor Meike SAURWEIN, Lecturer, Division of Environment and Sustainability, The Hong Kong University of Science and Technology

– Ms Evelyn Yu Shan PANG, Teaching Associate, Division of Environment and Sustainability, The Hong Kong University of Science and Technology

Abstract

In an era of complex global challenges, the need for interdisciplinary approaches in sustainability education has never been more critical. The Sustainability Education Community of Practice (SEC) aims to build on the power of interdisciplinary collaboration to foster innovative solutions and drive transformation in how we teach sustainability. SEC brings together faculty, staff and postgraduate researchers from diverse fields, including science, humanities, business, and engineering, who share a passion for teaching sustainability and an interest in innovating how we teach sustainability on campus. Our work centers on bringing together educators to form a platform for teaching collaboration, development of new teaching approaches and a network for sharing and learning. Through a serious or networking events, interactive workshops and focused support initiatives we aimed at supporting faculty and staff in developing new approaches towards teaching sustainability, discuss challenges, share tools and build up a support network. This presentation will showcase HKUST SEC’s key initiatives, including interdisciplinary workshops and collaborative teaching projects. We will highlight successful case studies that demonstrate the impact of our approach on building a community of educators who are passionate about driving sustainability. Attendees will gain insights into strategies for fostering interdisciplinary collaboration, learn about potential challenges and possibly be inspired to incorporate these practices into their own educational contexts.

Theme: 2. Thematic Exploration

Sub-theme: Community of Practice (CoP)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: H3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Henry Tsz Yeung FUNG, Lecturer cum Programme Director of ORGC Concentration, Communication Studies, Hong Kong Baptist University

Abstract

The outbreak of the COVID-19 pandemic had a profound impact on university students’ learning, necessitating a sudden shift from face-to-face learning to virtual learning. This sudden shift disrupted student-teacher interactions and cut off access to vital resources like libraries and media labs, leaving students scrambling in an unfamiliar digital landscape. Recognizing the need for accessible learning tools in these uncertain times, this study centres on the curation of a digital video archive featuring exemplary student works to facilitate peer-to-peer learning in the context of the COVID-19 pandemic. Fifty high-achieving students majoring in communication were invited to discuss their learning experiences and the processes involved in creating distinct class projects. These interviews were then turned into thirty short peer-learning videos and stored in a digital archive. The archive was advertised to over 200 students via mass email, in-class promotions, and school web pages during the Fall 2022 and Spring 2023 semesters. To gain a better understanding of student engagement with the digital archive as a means of active learning and knowledge construction, three focus group interviews were conducted. Findings reveal that the archive positively impacts student learning by providing an accessible, flexible platform for understanding course materials outside of the traditional classroom setting. This is particularly useful during the add/drop period when students want to learn more about the course before enrolment. Additionally, the peer advice and work samples shared in the videos provide a grounded perspective on instructor expectations, hence enabling students to produce higher-quality work.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)