Poster Presentation Time: 1225-1400; 1500-1600

Venue: H2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Pauli LAI, Lecturer, Department of Electrical and Electronic Engineering, The Hong Kong Polytechnic University

– Dr Julia CHEN, Director, Educational Development Centre, The Hong Kong Polytechnic University

Abstract

A common assessment in university is the oral presentation, and students are often required to deliver presentations in English. Two challenges arise. First, many students mainly focus on the discipline content in the assessment preparation process rather than the communication or use of English in their presentations. Second, lecturers of large classes (e.g. around 200 engineering students in one course) hardly have time to give feedback to each student on the English communication aspect of their oral presentations. A baseline survey reveals students’ need for assistance with presentation skills and a hope for having AI-generated feedback among both students and discipline teachers. To address these needs and hope, a team of educators from PolyU and BU with expertise in language and AI technology collaboratively developed an online English oral presentation platform called SmartPresenter. SmartPresenter provides students with presentation tips, learning materials, and extensive AI-generated feedback on the communication-related aspects of delivering oral presentations in English, including eye contact, facial expressions, vocal fillers, pronunciation, and fluency. This presentation describes the development and features of SmartPresenter, and the evaluation results of the effectiveness of the platform in facilitating independent learning practices for English oral presentations and assisting teachers in grading presentation assessment.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Aftab AMIN, Teaching Associate, Division of Life Science, The Hong Kong University of Science and Technology

Abstract

Virtual Reality (VR), Augmented Reality (AR) and Mixed Reality (MR) empower educators to develop active-learning pedagogical approaches that motivate students to simultaneously engage, develop knowledge, social skills, and subject interest. To initiate VR/AR learning at the Division of Life Science (LIFS), HKUST, LIFS1904 Laboratory for General Biology II (comprising four experiments, ~300 diverse learners) was selected. In recent years, increasing enrollment has created manpower and space shortages, while post-pandemic issues have made student learning and the acquisition of resources, such as rat cadavers for teaching anatomy, physiology, and dissection more challenging. To address pressing issues, enhance active-learning, and make practical transitions fluid and cohesive, gamification is being used to develop a customizable, Virtual Reality Platform (VRP). A story-based narrative has also been implemented to create immersive, engaging, memorable and impactful pedagogy. In this presentation we will examine the deliverables of the project. Some of the findings from our student surveys, focus groups and interviews will also be shared to provide a better understanding of how technology-driven pedagogical innovations can facilitate active learning, information literacy, enhance student support, and facilitate peer-teaching, so that graduate attributes can be delivered.

Theme: 1: Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: J1, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Professor Jeanne TAN, Professor, School of Fashion and Textiles, The Hong Kong Polytechnic University

– Dr Wing Chung WONG, Post-Doctoral Fellow, School of Fashion and Textiles, The Hong Kong Polytechnic University

Abstract

Talent development in innovation and technology is key to the sustainable development of a vibrant economy. STEM education plays a vital role in nurturing a globally competitive workforce for the future. Fostering STEM literacy at the early stages of education will equip students with the core knowledge and interdisciplinary skills for creative innovation and contributing to the future economy. Conventional education is often discipline-focused with a tendency to employ linear learning strategies which do not fully explore the knowledge opportunities present in the interdisciplinary STEM content. This often results in a skewed emphasis on technical content which young students may find difficult to contextualise in daily life. The reflective and adaptive nature of design may serve as an effective bridge to connect creativity and knowledge seeking in STEM domains (Toomey and Tan, 2018). A design-led STEM framework was adopted in two Quality Education Fund projects, reaching over 1000 secondary school students. These projects utilized fashion, artificial intelligence, and e-textiles as mediums to help students develop problem solving skills with real world applications.

Theme: 1: Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L2, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Kenneth Chi-hang LO, Associate Division Head and Senior Lecturer, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University

– Dr Anthony Wai-keung LOH, Division Head and Director of Hong Kong Community College, Division of Science, School of Medical and Health Sciences, College of Professional and Continuing Education, The Hong Kong Polytechnic University,

Abstract

The learning and teaching of science and/or engineering subjects face a big challenge under the COVID-19 pandemic because all face-to-face laboratory works are suspended. Since laboratory works are essential and critical elements to science and engineering education. Teachers have tried other means to relief the effect by performing demonstration, simulation or virtual laboratory, such that experimental data can be collected for analysis afterwards. However, students commented that they cannot see and control the laboratory apparatus in “real” time. Besides, students are required to conduct experiments in a fixed schedule and usually the teaching and laboratory schedules are not synchronized, due to the limited laboratory equipment and space. Students are required to conduct the experiment before the teaching of the corresponding theory. This affects their learning experience and motivation. The proposed project aims to develop a web-based remote laboratory for science and engineering education to facilitate student independent learning and enhance their learning experience. The objectives of the project are to: (1) design the infrastructure and software specification of the remote laboratory system; (2) identify experimental sets that can be conducted remotely; (3) enhance student learning experience and engagement as “real time” operation of laboratory equipment individually or in a group at anytime and anywhere under safe and controlled environment; (4) reduce the initial investment on offering science and/or engineering programmes by other local institutions for a better development of the sector; (5) enhance collaboration between local and even overseas institutions by sharing experimental sets; (6) inspire the tertiary education sector to develop blended and online teaching modules for science and engineering subjects which required laboratory works.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Dr Angela LI, Associate Professor, Division of Science, School of Medical and Health Sciences, Tung Wah College

– Dr Monica CHOW, Project Manager, Division of Science, School of Medical and Health Sciences, Tung Wah College

Abstract

Aiming to enhance the job-readiness of our students, an electronic teaching and learning kit for job-ready skill training (e-JR kit) is developed. This e-JR kit consists of three teaching modules that cover the topics of core skills needed for a paraprofessional job as a clinical assistant, including Module 1 Communication skills in the workplace, Module 2 safety and ethical issues in the workplace and Module 3 professional skills in the workplace. The regular industry involvement is a key feature of this e-JR kit project. Different industry stakeholders are continuously consulted, help with the design of real workplace scenarios, and give feedback on the effectiveness of the training. To accommodate the learning preferences of the current generation of students, the content of this e-JR kit is presented in bite-sized topics, such as case scenarios, short videos and small quizzes, and the design is highly visual and interactive. This well-designed kit will help students integrate their skills before employment, and to equip them with skills for a range of possible scenarios in the workplace. To promote the use of the e-JR kit, the completed kit will be shared with other local institutions and our industry partners in the pre-job training of their students and new staff.

Theme: 1: Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: H4, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Mr Isaac Ka Chun WAN, Instructional Designer, Centre for Education Innovation, The Hong Kong University of Science and Technology

Abstract

The use of videos in asynchronous learning significantly enhances the educational experience, especially for intricate or abstract concepts. Videos allow students to adapt their learning pace, fostering a more flexible and personalized process. However, traditional video lectures often promote passive learning, making it hard for instructors to monitor students’ progress effectively. To address these challenges and help instructors create an interactive video-based learning environment, a strategic workflow has been developed. This workflow incorporates two customized digital tools that facilitate the creation of engaging video elements and provide detailed analytics on student engagement and progress. As a result, students are empowered in their asynchronous learning journey.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.3  Special UGC Grant for Strategic Development of Virtual Teaching and Learning (VTL)

Oral Presentation Time: 1400-1500

Venue: Rose Room, Lower Level II

Presenter(s)

– Dr Ronnie SHROFF, Principal Project Fellow, Teaching and Learning Centre, Lingnan University

Abstract

In response to the COVID-19 pandemic, the University Grants Committee (UGC) and the Quality Assurance Council (QAC) allocated dedicated funding to support the strategic long-term development of virtual teaching and learning (VTL) in Hong Kong’s eight UGC-funded universities. Lingnan University, as the lead institution of a consortium of six participating universities, secured funding to establish benchmarking practices and quality assurance standards on VTL that reference internationally accepted standards within the local context. This project aims to strengthen institutional capabilities and enhance the quality of VTL provision, including online teaching and learning, distance education delivery, and technology-enhanced learning. The project involves collaboration and funding from The University of Hong Kong, The Hong Kong University of Science and Technology and the City University of Hong Kong, as well as in-kind support from The Chinese University of Hong Kong and The Hong Kong Polytechnic University. The primary objective of this project is to establish a shared quality assurance framework and standards for online learning and teaching that align with local and global standards. By adopting a collaborative approach, this project seeks to enhance the quality of VTL as a key strategic focus area of institutional development and performance improvement. This presentation will provide an overview of the project’s key objectives, methodology and outcomes. It will also discuss the challenges encountered and lessons learned in developing quality assurance and benchmarking standards for VTL across universities. Finally, the presentation will conclude with recommendations for future collaborations to enhance the quality of VTL provision within the Hong Kong higher education context.

Theme: 1. Showcase Project Achievements

Sub-theme: Strategic Development of Virtual Teaching and Learning (VTL)

Poster Presentation Time: 1225-1400; 1500-1600

Venue: L3, Tai Po-Shek-O Room, Lower Level I

Presenter(s)

– Dr Dr Edmund Tai Ming WUT, Senior Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

We aim to investigate factors affecting students’ intention to join blended learning courses in higher education sector using Community of Inquiry framework and Unified Theory of Acceptance and Use of Technology (UTAUT) model. Stimulus-Organism-Response (S-O-R) model was employed to develop a new research framework while constructs in the Community of Inquiry are Stimulus and constructs from UTAUT are considered as Organism and Response. A survey was conducted with undergraduate students in a Hong Kong higher institution. It was found that Teaching Presence (TP), Social Presence (SP) and Cognitive Presence (CP) were associated with performance expectancy, social influence and effort expectancy respectively. Performance expectancy and effort expectancy were associated with social influence. Social influence was associated with students’ attitude towards blended learning. Institution support was not related to the students’ attitude towards blended learning in the post-pandemic period. Attitude towards blended learning was associated with their behavioral intention to participate in blended learning. Online and offline tools could be adopted to improve the students’ acceptance towards the blended learning approach.

Theme: 1. Showcase Project Achievements

Sub-theme: 1.4  Other UGC grants, Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)

Oral Presentation Time: 1400-1500

Venue: Peony Room, Lower Level II

Presenter(s)

– Dr Peggy NG, Principal Lecturer, Division of Business and Hospitality Management, College of Professional and Continuing Education, The Hong Kong Polytechnic University

Abstract

With the development of innovative technology, virtual reality (VR) has become very popular and accessible to the public. There has been growing evidence that VR can influence people and change their values and behaviors. VR encourages individuals, especially teenagers, to engage in a specific behavior, such as pro-environmental behavior (PEB). Pro-environmental behavior (PEB) allowed lowering the environmental harms deliberately and substantially enhancing the future harmony. Using Value-Belief-Norm (VBN) theory, the present study aims to examine the relationship between teenagers’ perceived values and pro-environmental behavioral intention in VR platforms. Students (N = 120) were invited to visit the VR lab for an immersive experience focused on carbon footprint. The results showed that hedonic value predicts pro-environmental intention, whereas altruistic value predicts awareness of responsibility of individuals. The findings of the study will contribute to both theoretical and practical contributions. From practical perspectives, integrating VR into sustainability education can enhance student engagement by providing immersive and interactive VR experiences. This innovative approach of teaching fosters students’ pro-environmental intention, raising awareness of personal responsibility in caring for the environment. By incorporating VR elements into programme development, higher education institutions can better equip students with the knowledge in sustainability to address future environmental challenges.

Theme: 1. Showcase Project Achievements

Sub-theme: Quality Education Fund (QEF), and Quality Enhancement Support Scheme (QESS)